Polysulfones temperature performance

PET/PSF (polysulfone usually fiber reinforced) warp resistance, dimensional stabihty, stiffness, high temperature performance, chemical resistance. Apphcations include industrial process equipment, electrical connectors, and food processing equipment. 

In many fields of use polysulfones have replaced or are replacing metals, ceramics, and thermosetting plastics, rather than other thermoplastics. Since commercial polysulfones can be injection molded into complex shapes, they avoid costly machining and finishing operations. Polysulfones can also be extruded into film and foil. The latter is of interest for flexible printed circuitry because of its high-temperature performance. 

Polysulfone 70 2.65 80 5.5 0.07 High-temperature performance, electrical properties, hydrolytic resistance, tensile strength, dimensional stability Surface finish... 

One of the primary rationales for producing blends of polysulfone with other polymers is to use the polysulfone to impart separation and membrane capabilities to the material and for the second polymer to provide higher temperature performance than is possible with the use of the polysulfone alone. For example, in the next section of this chapter, blends of polysulfone with other high temperature polymers such as polyimides (Pis) and polybenzimidazole (PBl) will be discussed. Much of that effort is focused on the production of miscible blends that can be fabricated into both symmetric and asymmetric membranes. Later sections of this chapter will focus on the use of polysulfone in mixtures to modify other properties of polymers, particularly the fracture and impact behaviors. 

Acrylic ESTER POLYMERS Acrylonitrile POLYMERS Cellulose esters). Engineering plastics (qv) such as acetal resins (qv), polyamides (qv), polycarbonate (qv), polyesters (qv), and poly(phenylene sulfide), and advanced materials such as Hquid crystal polymers, polysulfone, and polyetheretherketone are used in high performance appHcations they are processed at higher temperatures than their commodity counterparts (see Polymers containing sulfur). 

Electrical Properties. Polysulfones offer excellent electrical insulative capabiUties and other electrical properties as can be seen from the data in Table 7. The resins exhibit low dielectric constants and dissipation factors even in the GH2 (microwave) frequency range. This performance is retained over a wide temperature range and has permitted appHcations such as printed wiring board substrates, electronic connectors, lighting sockets, business machine components, and automotive fuse housings, to name a few. The desirable electrical properties along with the inherent flame retardancy of polysulfones make these polymers prime candidates in many high temperature electrical and electronic appHcations. 

In addition to Nafion-based catalyst layers, additional types have been developed, including CLs with different ion exchange capacities (lECs) [57,58] or with other hydrocarbon-type ionomers such as sulfonated poly(ether ether ketone) [58-60], sulfonated polysulfone [61,62], sulfonated polyether ionomers [63], and borosiloxane electrolytes [64], as well as sulfonated polyimide [65]. These nonfluorinated polymer materials have been targeted to reduce cost and/or increase operating temperature. Unfortunately, such CLs still encounter problems with low Pt utilization, flooding, and inferior performance compared wifh convenfional Nafion-based CLs. 

Kambour et al. performed extensive studies on the mechanisms of plasticization [18-25]. The correlation observed between the critical strain to craze and the extent of the glass-transition temperature (Tg) depression speaks strongly in favor of a mechanism of easier chain motion and hence easier void formation. In various studies on polycarbonate [19,24], polyphenylene oxide [20], polysulfone [21], polystyrene [22], and polyetherimide [25], Kambour and coauthors showed that the absorption of solvent and accompanying reduction in the polymer s glass-transition temperature could be correlated with a propensity for stress cracking. The experiments, performed over a wide range of polymer-solvent systems, allowed Kambour to observe that the critical strain to craze or crack was least in those systems where the polymer and the solvent had similar solubility values. The Hildebrand solubility parameter S [26] is defined as... 

The effect of diluents on the viscoelastic behavior of amorphous polymers is more complex at temperatures below T, i.e., in the range of secondary relaxation processes. Mechanical, dielectric and NMR measurements have been performed to study the molecular mobility of polymer-diluent systems in this temperature range (see e.g. From extensive studies on polymers such as polycarbonate, polysulfone and polyvinylchloride, it is well known that diluents may suppress secondary relaxation processes. Because of the resulting increase in stiffness, these diluents are called antiplasticizers . Jackson and Caldwell have discussed characteristic properties... 

---