Polyolefin polymers terms Links

The most important monomers for the production of polyolefins, in terms of industrial capacity, are ethylene, propylene and butene, followed by isobutene and 4-methyl-1-pentene. Higher a-olefins, such as 1-hexene, and cyclic monomers, such as norbornene, are used together with the monomers mentioned above, to produce copolymer materials. Another monomer with wide application in the polymer industry is styrene. The main sources presently used and conceivably usable for olefin monomer production are petroleum (see also Chapters 1 and 3), natural gas (largely methane plus some ethane, etc.), coal (a composite of polymerized and cross-linked hydrocarbons containing many impurities), biomass (organic wastes from plants or animals), and vegetable oils (see Chapter 3). 

The dynamic cross-linking process is used to produce thermoplastic elastomers from mixtures of crystallizable polyolefins and various rubbers. Variations of basically the same method are employed to produce novel, stable polymer alloys by performing chemical reactions during extrusion of such mixtures. In that case, the cunent industrial term is reactive extrusion. Such processes are used, for example, to improve processability of LLDPE s into tubular film (by introducing long chain branches during extrusion with low levels of peroxides) or to... 

Low-density polyethylene (LDPE) is extensively used for the manufacture of films. During processing, which is carried out at temperatures of approximately 200°C, cross-linking, and thus formation of gel, can occur through oxidation if the polymer is not stabilized. Such gel particles are visible in the film as agglomerates, known as fish eyes or arrow heads. The processing stabilizers used in LDPE consist of systems commonly used for polypropylene, namely, combinations of a phosphite or phosphonite and a long-term heat stabilizer (hindered phenol) in overall concentrations up to 0.1%. Concentrations seldom exceed 0.1%, since the compatibility of any additive in LDPE is considerably lower than in any other polyolefins. 

---