Polymers grafted chains

The first case concerns particles with polymer chains attached to their surfaces. This can be done using chemically (end-)grafted chains, as is often done in the study of model colloids. Alternatively, a block copolymer can be used, of which one of the blocks (the anchor group) adsorbs strongly to the particles. The polymer chains may vary from short alkane chains to high molecular weight polymers (see also section C2.6.2). The interactions between such... 

Coagents ate often used with peroxides to increase the state of cure. Some coagents, such as polybutadiene or multifimctional methacrylates, are used at high levels to form polymer grafts or interpenetrating networks. Other coagents such as triaHyl cyanurate, triaHyl trimelHtate, and y /i -phenjiene bismaleimide are used at low levels to reduce the tendency of the polymer to degrade by chain scission. 

Modification of the membranes affects the properties. Cross-linking improves mechanical properties and chemical resistivity. Fixed-charge membranes are formed by incorporating polyelectrolytes into polymer solution and cross-linking after the membrane is precipitated (6), or by substituting ionic species onto the polymer chain (eg, sulfonation). Polymer grafting alters surface properties (7). Enzymes are added to react with permeable species (8—11) and reduce fouling (12,13). 

K. O Connor, T. McLeish. Entangled dynamics of heahng end-grafted chains at sohd/polymer interface. Faraday Discuss Chem Sci 95 67-78, 1994. 

The possibility of producing graft polymers with the same pre-assigned length of grafted chains ... 

Highly branched polymers, polymer adsorption and the mesophases of block copolymers may seem weakly connected subjects. However, in this review we bring out some important common features related to the tethering experienced by the polymer chains in all of these structures. Tethered polymer chains, in our parlance, are chains attached to a point, a line, a surface or an interface by their ends. In this view, one may think of the arms of a star polymer as chains tethered to a point [1], or of polymerized macromonomers as chains tethered to a line [2-4]. Adsorption or grafting of end-functionalized polymers to a surface exemplifies a tethered surface layer [5] (a polymer brush ), whereas block copolymers straddling phase boundaries give rise to chains tethered to an interface [6],... 

Tethering may be a reversible or an irreversible process. Irreversible grafting is typically accomplished by chemical bonding. The number of grafted chains is controlled by the number of grafting sites and their functionality, and then ultimately by the extent of the chemical reaction. The reaction kinetics may reflect the potential barrier confronting reactive chains which try to penetrate the tethered layer. Reversible grafting is accomplished via the self-assembly of polymeric surfactants and end-functionalized polymers [59]. In this case, the surface density and all other characteristic dimensions of the structure are controlled by thermodynamic equilibrium, albeit with possible kinetic effects. In this instance, the equilibrium condition involves the penalties due to the deformation of tethered chains. 

Another consequence of the absence of sponataneous transfer and termination reactions is that the polymer chains formed remain living 3), i.e. they carry at the chain end a metal-organic site able to give further reactions. Block copolymer synthesis is probably the major application 12 14), but the preparation of co-functional polymers, some chain extension processes, and the grafting onto reactions arise also directly from the long life time of the active sites. 

FIG. 15 Free energy per unit area as a function of surface separation for five different values of x-The parameters are Ng = 25, p = 0.04, N = 100, and Xsurf = 0. The cartoon on the left shows the reference state, where the grafted chains form a melt between the surfaces. In the cartoon on the right, the surfaces are separated by polymers that have localized between the interfaces. (From Ref. 100.)... 

Kato, K., Uchida, E., Kang, E. T, Uyama, Y. and Ikada, Y. (2003) Polymer surface with graft chains. Prog, Polym. Sci., 28, 209-259. 

PNIPAM-co-GMA (Table 1). Thus, different distributions of substituents are possible, in principle. It was of interest to see (1) whether the distribution of the PEO grafts on the PNIPAM main chain influences the thermal properties of the polymer and (2) whether the polymer grafted at elevated temperature adopted the collapsed conformation in which it was synthesised when its aqueous solution was heated. 

The steric stabilization of dispersed particles by both grafted chains and by physically adsorbed polymers has been much studied in recent years. In the present paper we extend earlier work on... 

The A-B type iniferters are more useful than the B-B type for the more efficient synthesis of polymers with controlled structure The functionality of the iniferters can be controlled by changing the number of the A-B bond introduced into an iniferter molecule, for example, B-A-B as the bifunctional iniferter. Detailed classification and application of the iniferters having DC groups are summarized in Table 1. In Eqs. (9)—(11), 6 and 7 serve as the monofunctional iniferters, 9 and 10 as the monofunctional polymeric iniferters, and 8 and 11 as the bifunctional iniferters. Tetrafunctional and polyfunctional iniferters and gel-iniferters are used for the synthesis of star polymers, graft copolymers, and multiblock copolymers, respectively (see Sect. 5). When a polymer implying DC moieties in the main chain is used, a multifunctional polymeric iniferter can be prepared (Eqs. 15 and 16), which is further applied to the synthesis of multiblock copolymers. 

---