Polymer processing cross-link promoters

Polymers. AH nitro alcohols are sources of formaldehyde for cross-linking in polymers of urea, melamine, phenols, resorcinol, etc (see Amino RESINS AND PLASTICS). Nitrodiols and 2-hydroxymethyl-2-nitro-l,3-propanediol can be used as polyols to form polyester or polyurethane products (see Polyesters Urethane polymers). 2-Methyl-2-nitro-l-propanol is used in tires to promote the adhesion of mbber to tire cord (qv). Nitro alcohols are used as hardening agents in photographic processes, and 2-hydroxymethyl-2-nitro-l,3-propanediol is a cross-linking agent for starch adhesives, polyamides, urea resins, or wool, and in tanning operations (17—25). Wrinkle-resistant fabric with reduced free formaldehyde content is obtained by treatment with... 

The stmctural architecture of siUcone polymers, such as the number of D, T, and Q sites and the number and type of cross-link sites, can be deterrnined by a degradative analysis technique in which the polymer is allowed to react with a large excess of a capping agent, such as hexamethyidisiloxane, in the presence of a suitable equiUbration catalyst (eq. 38). Triflic acid is often used as a catalyst because it promotes the depolymerization process at ambient temperature (444). A related process employs the KOH- or KOC2H -catalyzed reaction of siUcones with excess Si(OC2H )4 (eq. 39) to produce ethoxylated methylsiUcon species, which are quantitatively deterrnined by gc (445). 

Accelerate chemical, photochemical, biochemical reactions or processes, e.g. cross-linking or degradation of polymers. Also called promoters, co-catalysts. Refer usually to the cure process in thermosetting resins. 

Oil-field chemistry has undergone major changes since the publication of earlier books on this subject Enhanced oil recovery research has shifted from processes in which surfactants and polymers are the primary promoters of increased oil production to processes in which surfactants are additives to improve the incremental oil recovery provided by steam and miscible gas injection fluids. Improved and more cost-effective cross-linked polymer systems have resulted from a better understanding of chemical cross-links in polysaccharides and of the rheological behavior of cross-linked fluids. The thrust of completion and hydraulic fracturing chemical research has shifted somewhat from systems designed for ever deeper, hotter formations to chemicals, particularly polymers, that exhibit improved cost effectiveness at more moderate reservoir conditions. 

Investigations into the molecular weight distribution showed that C—C bond break down randomly [126]. Thus, in the PS oxidized at 473 K, the ratio Mw/A/n initially increased from 1.06 to 1.50 (in this case, Mn decreased from 400,000 to 90,000) and remained virtually unchanged during further oxidation. The situation was different with PE residual oxygen at concentrations as low as 0.3% promoted the destruction of this polymer [127]. Moreover, anaerobic conditions at 588 K induced cross-linking processes in PE, while in the presence of 0.34% 02 the destructive processes became predominant. The decrease in Mn at 628 K under anaerobic conditions was not accompanied by changes in the ratio Mw/Mn 3. Conversely, this ratio increased in the course of the oxidative destruction of PE. 

---