Polymer blends behavior

M. Bousmina, J.F. Palieme, L.A. Utracki, Modeling of polymer blends behavior during capillary flow. Polym. Eng. Sci. 39(6), 1049-1059 (1999)... 

Muller M 1999 Misoibility behavior and single ohain properties in polymer blends a bond fluotuation model study Macromol. Theory Simul. 8 343... 

Ternary Blends. Discussion of polymer blends is typically limited to those containing only two different components. Of course, inclusion of additional components may be useful in formulating commercial products. The recent Hterature describes the theoretical treatment and experimental studies of the phase behavior of ternary blends (10,21). The most commonly studied ternary mixtures are those where two of the binary pairs are miscible, but the third pair is not. There are limited regions where such ternary mixtures exhibit one phase. A few cases have been examined where all three binary pairs are miscible however, theoretically this does not always ensure homogeneous ternary mixtures (10,21). 

A variety of experimental techniques have been used to prepare and characterize polymer blends some of the mote important ones for estabHshing the equiHbtium-phase behavior and the energetic interactions between chain segments ate described here (3,5,28,29). 

Block (Star) Arrangement. The known star polymers, like their linear counterparts, exhibit microphase separation. In general, they exhibit higher viscosities in the melt than their analogous linear materials. Their rheological behavior is reminiscent of network materials rather than linear block copolymers (58). Although they have been used as compatibiUzers in polymer blends, they are not as effective at property enhancements as linear diblocks... 

Flow Behavior of Polymer Blends as Affected by Interchain Crosslinking... 

Flow behavior of the polymer blends is determined by their structure, which is governed by the degree of dispersion of the component and by the mode of their distribution. For blends having identical compositions, it is possible to produce systems in which one and the same component may be either a dispersion medium or a dispersed phase [1]. This behavior of the polyblend systems depends on various parameters, the most important of which is the blending sequence. It is, therefore, difficult to obtain a uniform composition property relationship for the polymer blends even though the composition remains identical. 

The flow behavior of the polymer blends is quite complex, influenced by the equilibrium thermodynamic, dynamics of phase separation, morphology, and flow geometry [2]. The flow properties of a two phase blend of incompatible polymers are determined by the properties of the component, that is the continuous phase while adding a low-viscosity component to a high-viscosity component melt. As long as the latter forms a continuous phase, the viscosity of the blend remains high. As soon as the phase inversion [2] occurs, the viscosity of the blend falls sharply, even with a relatively low content of low-viscosity component. Therefore, the S-shaped concentration dependence of the viscosity of blend of incompatible polymers is an indication of phase inversion. The temperature dependence of the viscosity of blends is determined by the viscous flow of the dispersion medium, which is affected by the presence of a second component. 

Miscible Polymer Blends A subclass of polymer bends encompassing those blends that exhibit single-phase behavior. 

Flory-Huggins model for polymer solutions, based on statistical thermodynamics, is often used for illustrating the behavior of polymer blends [6,7]. The expression for the free energy change... 

The all-important difference between the friction properties of elastomers and hard solids is its strong dependence on temperature and speed, demonstrating that these materials are not only elastic, but also have a strong viscous component. Both these aspects are important to achieve a high friction capability. The most obvious effect is that temperature and speed are related through the so-called WLF transformation. For simple systems with a well-defined glass transition temperature the transform is obeyed very accurately. Even for complex polymer blends the transform dominates the behavior deviations are quite small. 

Kammer, H. W., Kressler, H. and Kummerioewe, C Phase Behavior of Polymer Blends - Effects of Thermodynamics and Rheology. Vol. 106, pp, 31-86. 

Phase behavior in complex fluids such as polymer blends and block copolymers has been a rich area of the chemical sciences. Near-critical and other transitional phenomena are frequently prominent. Since molecular movement in viscous systems such as these is comparatively slow, phase transitions can be studied more easily in time, and manipulated by quenching and other external influences. Processes for controlled growth of ordered materials are often readily influenced by diffusion, a variety of external fields, and the influence of interacting boundaries, or flow. 

---