Polyimides dianhydride reactants

Table 3.5 Typical diamine and dianhydride reactants for polyimides... 

Table 3.5. Typical Diamine and Dianhydride Reactants for Polyimides...

Photosensitive functions are in many cases also heat sensitive, so the preparation of photosensitive polyimides needs smooth conditions for the condensations and imidization reactions. Some chemical reactants, which can be used for polyamide preparation, have been patented for the synthesis of polyimides and polyimide precursors. For example, chemical imidization takes place at room temperature by using phosphonic derivative of a thiabenzothiazoline.102 A mixture of N -hydroxybenzotriazole and dicyclohexylcarbodiimide allows the room temperature condensation of diacid di(photosensitive) ester with a diamine.103 Dimethyl-2-chloro-imidazolinium chloride (Fig. 5.25) has been patented for the cyclization of a maleamic acid in toluene at 90°C.104 The chemistry of imidazolide has been recently investigated for the synthesis of polyimide precursor.105 As shown in Fig. 5.26, a secondary amine reacts with a dianhydride giving meta- and para-diamide diacid. The carbonyldiimidazole... 

Polyetherimides (PEI) are polyimides containing sufficient ether as well as other flexibi-lizing structural units to impart melt processability by conventional techniques, such as injection molding and extrusion. The commercially available PEI (trade name Ultem) is the polymer synthesized by nucleophilic aromatic substitution between 1,3-bis(4-nitrophthalimido) benzene and the disodium salt of bisphenol A (Eq. 2-209) [Clagett, 1986]. This is the same reaction as that used to synthesize polyethersulfones and polyetherketones (Eq. 2-206) except that nitrite ion is displaced instead of halide. Polymerization is carried out at 80-130°C in a polar solvent (NMP, DMAC). It is also possible to synthesize the same polymer by using the diamine-dianhydride reaction. Everything being equal (cost and availability of pure reactants), the nucleophilic substitution reaction is probably the preferred route due to the more moderate reaction conditions. 

Further improvements in polymerized monomeric reactants are achieved by end capping the phenylethynyl-terminated imide with resin precursor agents such as 4-phenylethynyl phthatic anhydride (PEPA) or biphenyl dianhydride-based polyimides, which offer toughness and flexibility up to 569°E (316°C) in carbon fiber nanocomposites. 

They belong to reactant bearing the functional groups suitable for the synthesis of polyimides, mainly dianhydrides [147,175] of the form (Scheme 33) ... 

---