Polybutylene terephthalate pressure

PET is a modifier that blends with polybutylene terephthalate (PBT) with miscible phase behaviour. It is commercially available for ready use. This blend exhibits improved surface gloss when compared to PBT alone. PET/PBT films have been suggested as a pressure-resistive... 

Figure 6.58 Dynamic coefficient of friction versus pressure for BASF Ultradur polybutylene terephthalate polyester [15],...

Another class of crystalline polyesters with commercial potential is biodegradable polyesters. Pollet et al. [47] evaluated three different biodegradable polyesters (polybutylene succinate (BIO Bionolle manufactured by Showa High Polymer Co.), and two polybutylene-adipate-co-butylene-terephthalates (ECO Ecoflex F manufactured by BASF and EAS EastasrBio Ultra manufactured by Novamont)). The organo-montmorillonite utilized in the evaluations was Cloisite SOB. The Cloisite 30B was dried at 40°C under reduced pressure for 4 h. Cloisite 30B must be properly dried for this application. The composites with the best mechanical performance were prepared with a two-roll mill (Agila) for 10 min with the temperature set at 150°C for EAS and ECO and 160°C for BIO. The montmorillonite content of the composites was 3 wt.%. Preparing a master batch of polymer with a 36 wt.% Cloisite SOB initially with subsequent formulation was not as effective. 

---