Polyamide melting point

The combination of strong intermolecular forces and high chain stiffness accounts for the high melting points of polyamides through application of Eq.(4.5). 

The pelargonic acid by-product is already a useful item of commerce, making the overall process a commercial possibiUty. The 13-carbon polyamides appear to have many of the properties of nylon-11, nylon-12, or nylon-12,12 toughness, moisture resistance, dimensional stabiUty, increased resistance to hydrolysis, moderate melt point, and melt processibiUty. Thus, these nylons could be useful in similar markets, eg, automotive parts, coatings, fibers, or films. Properties for nylon-13,13 are = 56 (7 and = 183 (7 (179). 

Fig. 1. Effect of amide frequency on the melting points of AB-type (x ) and AABB-type ( ) polyamides. The numbers on the curves indicate the specific...

The thermoplastic or thermoset nature of the resin in the colorant—resin matrix is also important. For thermoplastics, the polymerisation reaction is completed, the materials are processed at or close to their melting points, and scrap may be reground and remolded, eg, polyethylene, propjiene, poly(vinyl chloride), acetal resins (qv), acryhcs, ABS, nylons, ceUulosics, and polystyrene (see Olefin polymers Vinyl polymers Acrylic ester polymers Polyamides Cellulose ESTERS Styrene polymers). In the case of thermoset resins, the chemical reaction is only partially complete when the colorants are added and is concluded when the resin is molded. The result is a nonmeltable cross-linked resin that caimot be reworked, eg, epoxy resins (qv), urea—formaldehyde, melamine—formaldehyde, phenoHcs, and thermoset polyesters (qv) (see Amino resins and plastics Phenolic resins). 

Fig. 3. Melting point versus composition for polyamide copolymers. The comonomers employed are adipic acid, forming adipamide copolymers (O), and...

Figure 4.11 Zig-zag effect on melting points with increasing number of carbon atoms in (a) polyurethanes of type -(CH2)400CNH (CH2)nNHCOO- and (b) polyamides of type -(CH2)r,CONH-...

Figure 18.10. Melting points of polyamides from aliphatic diamines A, with adipic acid, B, with sebacic acid. (After Coffmann et al )...

As with the aliphatic polyamides, the heat deflection temperature (under 1.82 MPa load) of about 96°C is similar to the figure for the Tg. As a result there is little demand for unfilled polymer, and commercial polymers are normally filled. The inclusion of 30-50% glass fibre brings the heat deflection temperature under load into the range 217-231°C, which is very close to the crystalline melting point. This is in accord with the common observation that with many crystalline polymers the deflection temperature (1.82 MPa load) of unfilled material is close to the Tg and that of glass-filled material is close to the T. ... 

Specialty waxes include polar waxes for more polar adhesive systems. Examples would be castor wax (triglyceride of 12-hydroxy stearic acid) or Paracin wax N- 2 hydroxy ethyl)-12-hydroxy stearamide) which are used in polyester, polyamide, or with high VA EVA copolymer-based systems. Other common polar waxes are maleated polyethylenes, which are used to improve the specific adhesion of polyethylene-based adhesives, and low molecular weight ethylene copolymers with vinyl acetate or acrylic acid, which are used to improve low temperature adhesion. High melting point isotactic polypropylene wax (7 155°C) and highly refined paraffin wax (7,n 83°C) are used where maximum heat resistance is critical. Needless to say, these specialty waxes also command a premium price, ranging from 2 to 5 times that of conventional paraffin wax. 

The mechanical and thermal behaviors depend partly on the degree of crystallinity. For example, highly disordered (dominantly amorphous) polymers make good elastomeric materials, while highly crystalline polymers, such as polyamides, have the rigidity needed for fibers. Crystallinity of polymers correlates with their melting points. 

Aliphatic hyperbranched polyesters, 56 Aliphatic isocyanate adducts, 202 Aliphatic isocyanates, 210, 225 Aliphatic polyamides, 138 Aliphatic polyesteramides, 56 Aliphatic polyesters, 18, 20, 29, 32, 87 degradable, 85 hyperbranched, 114-116 melting points of, 33, 36 structure and properties of, 40-44 syntheses of, 95-101 thermal degradation of, 38 unsubstituted and methyl-substituted, 36-38... 

---