Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Polyox Poly

Fig. 9. Melt flow index as a function of temperature for varying molecular weights of poly(ethylene oxide). WSR = Polyox water-soluble resins. Fig. 9. Melt flow index as a function of temperature for varying molecular weights of poly(ethylene oxide). WSR = Polyox water-soluble resins.
Only Japan and the United States have significant commercial faciUties for the production of poly(ethylene oxide) resins. In Japan, Meisei Chemical Works Ltd. produces Alkox and Sumitomo Seika Kagaky Co., Ltd., PEO. In the United States, Union Carbide Corp. produces Polyox. Precise figures have not been released on capacities or aimual production. [Pg.343]

Of the three worldwide manufacturers of poly(ethylene oxide) resins. Union Carbide Corp. offers the broadest range of products. The primary quaUty control measure for these resins is the concentrated aqueous solution viscosity, which is related to molecular weight. Specifications for Polyox are summarized in Table 4. Additional product specifications frequendy include moisture content, particle size distribution, and residual catalyst by-product level. [Pg.343]

Considerable interest has been shown ia poly(ethylene oxide) for diverse appHcations ia food, drug, and cosmetic products. Such uses fall within the scope of the Federal Food, Dmg, and Cosmetic Act. The U.S. FDA has recognized and approved the use of poly(ethylene oxide) for specific food and food packaging uses. USP/NF-grades of Polyox water-soluble resins (Union Carbide Corp.) are available for pharmaceutical appHcations. [Pg.344]

Polyox Poly(ethylene oxide) Union Carbide... [Pg.944]

SYNS ALKAPOL PEG-200 ALKAPOL PEG-300 ALKAPOL PEG-600 ALKAPOL PEG-6000 ALKAPOL PEG-8000 CARBOWAX D O-PlYDRO-omega-HYDROXYPOLY(OXY-l,2-ETHANEDIYL) JEFFOX JORCHEM 400 ML LUTROL PLURACOL E-200 PLURACOL E-300 PLURACOL E-400 PLURACOL E-600 PLURACOL E-1500 PLURACOL E-4000 PLURACOL E-6000 PLURACOL P-410 PLURACOL P-710 PLURACOL P-1010 PLURACOL P-2010 PLURACOL P-3010 PLURACOL P-4010 D POLY(ETHYLENE OXIDE) POLY-G SERIES POLYOX POLY(OXY-l,2-ETHANEDIYL), O-HYDRO-omega-HYDROXY-... [Pg.1143]

Poly Ethylene Oxide) (PEO) Polymers. In the same family as PEG, but having higher molecular weights are POLYOX resins, which are water-soluble polymers. Because of their low melting point and unique swelling properties, coupled with the controlled rate of dissolution, POLYOX resins have been used to make sustained-release formulations by hot-melt extrusion.f ... [Pg.765]

Synonyms cas 25322-68-3 CARBOWAX a-HYDROXY-(o-HYDROXY-POLY(OXY-l,2-ETHANEDIYL) JEFFOX LUTROL PEG POLY(ETHYLENE OXIDE) POLY-G SERIES POLYOX... [Pg.234]

The two surfactant polymers used to stabilize the heptane and water emulsion were poly(ethylene oxide), PEO, and poly(vinyl alcohol), PVA. Poly(ethylene oxide), also known as Polyox, was obtained from Union Carbide Corporation, South Charleston, West Viriginia, Polyox WSR N-10, the grade of polymer used in this work, had an average molecular weight of 100,000. The poly(vlnyl alcohol) used was marketed by Monsanto, St. Louis, Missouri, as Gelvatol 20/90. This polymer has an average molecular weight of 125,000. [Pg.170]

In 1958, commercial poly( ethylene oxide)s of very high molecular weight became available from Union Carbide (trademark Polyox). Two Japanese companies, Meisei Chemical Works, Ltd., and Seitetsu Kagaku Company, Ltd., have begun producing poly(ethylene oxide) under the trademarks Alkox and PEO, respectively. Heterogeneous catalyst systems, which are mainly of two types, namely, alkaline earth... [Pg.489]

Polyox Union Carbide Poly(ethylene oxide)... [Pg.807]

Poly(tetrailuoroethylene) lubricant powders, 271 Polyox 301 Poly(ethylene oxide), 441 PolyTHE CD THE copolymers, 510 Porewick ... [Pg.562]

Synonyms a-Hydroxy-co-hydroxypoly (oxy-1,2-ethanediyD PEG PEG Polyether glycol Poly (ethylene oxide) Polyglycol Polyox Poly (oxy-1,2-ethanediyl), a-h] ro-(o-hydroxy-Classification Aliphatic organic compd. [Pg.1295]

Polyorganosiloxanes. See Silicone Polyorthosilicic acid. See Silica, hydrated Polyox. See Polyethylene glycol Poly[1-(2-oxo-1-pyrrolidiny0 ethylene]. See PVP Poly (oxy-1,4-butanediyl)-a-hydro-Q>-hydroxy- Poly (oxybutylene) glycol Poly (oxy-1,4-butylene) glycol. See Polytetramethylene ether glycol... [Pg.1301]

Polyglycol Polyox Poly (oxy-1,2-ethanediyl), a-hydro-w-hydroxy-... [Pg.3483]

Polyox WSR 1105. See PEG-20M Polyox WSR 3333. See PEG-9M Polyox WSR Coagulant See PEG-115M Polyox WSR N-10. See PEG-2M Polyox WSR N-12K. See PEG-23M Polyox WSR N-60K. See PEG-45M Polyox WSR N-80. See PEG-5M Polyox WSR N-750. See PEG-7M Polyox WSR N-3000. See PEG-14M Polyox. See Polyethylene glycol Poly[1-(2-oxo-1-pyrrolidinyl) ethylene]. See PVP Poly (1-(2-oxo-1-pyrrolidinyl) ethylene) iodine complex. See PVP-iodine Poly (oxy-1,4-butanediyl)-a-hydro-b)-hydroxy- Poly (oxybutylene) glycol Poly (oxy-1,4-butylene) glycol. See Polytetramethylene ether glycol... [Pg.3535]

Pluracol E400 Pluracol E400 NF Pogol 400 Polidac 400 Poly-G 400 Polyox WSR 1105 Prochem 400 Protachem 400 Renex PEG 400 Rhodasurf E 400 Sinopol PEG400 Sympatens-PEG/400 Unipeg 400 Unipeg-400 X U pi wax 400 225-863-2... [Pg.6849]

Polyox n. High-molecular-weight poly(ethyl-ene oxide, manufactured by Union Carbide, USA. [Pg.761]

Poly(ethylene oxide) <25-80 (Tr ) Polyox Mechanical properties ideal for abuse-deterrent applications and CR Process temperatures 70 °C Excellent CR polymer... [Pg.213]

See other pages where Polyox Poly is mentioned: [Pg.466]    [Pg.741]    [Pg.123]    [Pg.124]    [Pg.124]    [Pg.124]    [Pg.466]    [Pg.219]    [Pg.2099]    [Pg.223]    [Pg.223]    [Pg.504]    [Pg.6]    [Pg.466]    [Pg.156]    [Pg.297]    [Pg.92]    [Pg.6478]    [Pg.19]    [Pg.254]   


SEARCH



Polyox

© 2024 chempedia.info