Pollution polymer industry

Ethene and propene are produced as bulk feedstocks for the chemical (polymer) industry and therefore their purities are important parameters. In particular, H2S and COS are compounds which may not only cause corrosion problems in processing equipment, but also may have detrimental effects on the catalysts in use. Eurthermore, air pollution regulations issued by, among others, the US Environmental Protection Agency (EPA) require that most of the sulfur gases should be removed in order to minimize Sulfur emissions into the atmosphere. Therefore, these compounds have to be determined to the ppb level. 

The unique appearance of an infrared spectrum has resulted in the extensive use of infrared spectrometry to characterize such materials as natural products, polymers, detergents, lubricants, fats and resins. It is of particular value to the petroleum and polymer industries, to drug manufacturers and to producers of organic chemicals. Quantitative applications include the quality control of additives in fuel and lubricant blends and to assess the extent of chemical changes in various products due to ageing and use. Non-dispersive infrared analysers are used to monitor gas streams in industrial processes and atmospheric pollution. The instruments are generally portable and robust, consisting only of a radiation source, reference and sample cells and a detector filled with the gas which is to be monitored. 

Occupational and environmental exposure to chemicals can take place both indoors and outdoors. Occupational exposure is caused by the chemicals that are used and produced indoors in industrial plants, whereas nonoccupa-tional (and occupational nonindustrial) indoor exposure is mainly caused by products. Toluene in printing plants and styrene in the reinforced plastic industry are typical examples of the two types of industrial occupational exposures. Products containing styrene polymers may release the styrene monomer into indoor air in the nonindustrial environment for a long time. Formaldehyde is another typical indoor pollutant. The source of formaldehyde is the resins used in the production process. During accidents, occupational and environmental exposures may occur simultaneously. Years ago, dioxin was formed as a byproduct of production of phenoxy acid herbicides. An explosion in a factory in... 

The desire to replace cadmium is generally attributed to its toxicity, both in terms of process pollution and product corrosion, and several alternatives are feasible thicker zinc, tin-zinc alloy or tin-nickel alloy depending upon the precise application " . The demise of decorative nickel-chrome systems in the automotive industries of the world is partly due to cost and partly to market image, and not to technical performance where major improvements took place in the period 1960-1975 through the establishment of duplex nickel under-layers and micro discontinuous chromium top-layers. In the 1980s the trend has been towards black finishes produced generally by powder-applied epoxy polymers. 

---