Polar addition nucleophilic additions

With the dicyclohexylcarbodiimide (DCQ reagent racemization is more pronounced in polar solvents such as DMF than in CHjCl2, for example. An efficient method for reduction of racemization in coupling with DCC is to use additives such as N-hydroxysuccinimide or l-hydroxybenzotriazole. A possible explanation for this effect of nucleophilic additives is that they compete with the amino component for the acyl group to form active esters, which in turn reaa without racemization. There are some other condensation agents (e.g. 2-ethyl-7-hydroxybenz[d]isoxazolium and l-ethoxycarbonyl-2-ethoxy-l,2-dihydroquinoline) that have been found not to lead to significant racemization. They have, however, not been widely tested in peptide synthesis. 

Polyurethane Formation. The key to the manufacture of polyurethanes is the unique reactivity of the heterocumulene groups in diisocyanates toward nucleophilic additions. The polarization of the isocyanate group enhances the addition across the carbon—nitrogen double bond, which allows rapid formation of addition polymers from diisocyanates and macroglycols. 

The initial discussion in this chapter will focus on addition reactions. The discussion is restricted to reactions that involve polar or ionic mechanisms. There are other important classes of addition reactions which are discussed elsewhere these include concerted addition reactions proceeding through nonpolar transition states (Chapter 11), radical additions (Chapter 12), photochemical additions (Chapter 13), and nucleophilic addition to electrophilic alkenes (Part B, Chi iter 1, Section 1.10). 

The first three chapters discuss fundamental bonding theory, stereochemistry, and conformation, respectively. Chapter 4 discusses the means of study and description of reaction mechanisms. Chapter 9 focuses on aromaticity and aromatic stabilization and can be used at an earlier stage of a course if an instructor desires to do so. The other chapters discuss specific mechanistic types, including nucleophilic substitution, polar additions and eliminations, carbon acids and enolates, carbonyl chemistry, aromatic substitution, concerted reactions, free-radical reactions, and photochemistry. 

The initial step of olefin formation is a nucleophilic addition of the negatively polarized ylide carbon center (see the resonance structure 1 above) to the carbonyl carbon center of an aldehyde or ketone. A betain 8 is thus formed, which can cyclize to give the oxaphosphetane 9 as an intermediate. The latter decomposes to yield a trisubstituted phosphine oxide 4—e.g. triphenylphosphine oxide (with R = Ph) and an alkene 3. The driving force for that reaction is the formation of the strong double bond between phosphorus and oxygen ... 

We saw in Section 17.5 that treatment of an aldehyde or ketone with a Grignard reagent, RMgX, yields an alcohol by nucleophilic addition of a carbon anion, or carbanion. A carbon-magnesium bond is strongly polarized, so a Grignard reagent reacts for all practical purposes as R - +MgX. 

Like a carbonyl group, a nitrile group is strongly polarized and has an electrophilic carbon atom. Nitriles therefore react with nucleophiles to yield 5p2-hybridized imine anions in a reaction analogous to the formation of an sp3-hybridized alkoxide ion by nucleophilic addition to a carbonyl group. 

Base catalyzed nitrile hydrolysis involves nucleophilic addition of hydroxide ion to the polar C N bond to give an imine anion in a process similar to nucleophilic addition to a polar C=0 bond to give an alkoxide anion. Protonation then gives a hydroxy imine, which tautomerizes (Section 8.4) to an amide in a step similar to the tautomerization of an enol to a ketone. The mechanism is shown in Figure 20.4. 

Reduction Conversion of Nitriles into Amines Reduction of a nitrile with LiAIH4 gives a primary amine, RNH . The reaction occurs by nucleophilic addition of hydride ion to the polar C=N bond, yielding an imine anion, which still contains a C=N bond and therefore undergoes a second nucleophilic addition of hydride to give a dianion. Both monoanion and dianion intermediates are undoubtedly stabilized by Lewis acid-base complexafion to an aluminum species, facilitating the second addition that would otherwise be difficult Protonation of the dianion by addition of water in a subsequent step gives the amine. 

Nitriles are similar in some respects to carboxylic acids and are prepared either by SN2 reaction of an alkyl halide with cyanide ion or by dehydration of an amide. Nitriles undergo nucleophilic addition to the polar C=N bond in the same way that carbonyl compounds do. The most important reactions of nitriles are their hydrolysis to carboxylic acids, reduction to primary amines, and reaction with organometallic reagents to yield ketones. 

The exact behavior and mechanism of electrophilic additions to alkynes is clearly strongly dependent upon the reaction conditions. In a highly polar and strongly acidic but weakly nucleophilic solvent such as trifluoroacetic acid, addition via a vinyl cation intermediate is favored whereas in less polar, more nucleophilic solvents such as acetic acid, a different mechanism prevails. 

Heteroatom substituents also introduce polar effects. In the case of a-alkoxy aldehydes the preferred TS appears to be F and G for the E- and Z-enolates, respectively. These differ from the normal Felkin TS for nucleophilic addition. The reactant conformation is believed to be determined by minimization of dipolar repulsion between the alkoxy substituent and the carbonyl group.96 This model predicts higher 3,4-anti ratios for Z-enolates, and this is observed. 

Nucleophiles react with nitrile oxides in a 1,3-nucleophilic addition pattern. The carbon atom of the CNO group is being attacked by the negatively polarized part... 

The 1,3-dipolar addition to terminal alkenes of nitrile oxides, generated from nitromethylene derivatives of bicycloheptane, provides 9,ll-ethano-13,15-isoxazolinoprostanoids, PGH analogs, with alkyl, phenyl, or additional heterocyclic fragment in the oo-chain (461). Chemical transformations of 9,11-ethano-13,15-isoxazolinoprostanoids furnish prostanoids with bifunctional fragments of P-hydroxyketone and a-aminoalcohol in the oo-chain. The reaction of P-hydroxy ketones with methanesulfonyl chloride gives rise to prostanoids with an enone component in the oo-chain. 9,ll-Ethano-16-thiaprostanoids have been prepared, for the first time, by nucleophilic addition of thiols to the polarized double bond in the oo-chain. The 1,3-dipolar addition to terminal alkenes of nitrile oxides, generated from nitromethylene derivatives of bicycloheptane provides 9,ll-ethano-13,15-isoxazolinoprostanoids with an alkyl, phenyl, or additional heterocyclic fragment in the oo-chain (462). 

The allenes 1 directly connected with an electron-withdrawing substituent have been used successfully as synthetic building blocks for more than four decades (see Scheme 7.1). The polarization of the C=C double bonds by the acceptor substituent allows a wide and very useful range of subsequent reactions, for example nucleophilic additions, cycloadditions and miscellaneous syntheses of heterocydes. 

A solvent-dependent chemoselectivity, pointing to a dependence of the relative reactivities of the 1,2- and 1,1-disubstituted double bonds on solvent polarity and nucleophilicity, has been observed in the reaction of benzeneselenenyl chloride with 2-methylenebicyclo[2.2.1]hept-5-ene (159) which gives products 160-163140. In methylene chloride the reaction occurs with a moderate chemoselectivity, attack on the endocyclic bond being preferred over that on the exocyclic one in a 60 40 ratio. In methanol, the addition is completely chemoselective and the attack occurs exclusively on the endocyclic double bond (equation 132). It may be further noted that 162 and 163 isomerize and solvolyze at high temperatures, leading to the homoallylic products 160 and 161. 

Because of the polarization, it is possible for the carbonyl group to be involved in both nucleophilic addition reactions and electrophilic addition reactions. 

The most significant change in these reactions is the formation of the carbon-nncleophile bond so, in both types of mechanism, the reaction is termed a nucleophilic addition. It should be noted that the polarization in the carbonyl group leads to nucleophilic addition, whereas the lack of polarization in the C=C donble bond of an alkene leads to electrophilic addition reactions (see Chapter 8). Carbonyl groups in carboxylic acid derivatives undergo a similar type of reactivity to nucleophiles, but the... 

Most reactions of sulfuric and phosphoric acid derivatives can be rationalized by considering that the S=0 and P=0 functionalities are equivalent to the carbonyl group, and that polarization in these groups allows similar nucleophilic reactions to occur. Initial nucleophilic addition will then be followed by loss of an appropriate leaving group and regeneration of the S=0 or P=0. 

The addition of RLi and other nucleophiles to carbonyl functions in general proceeds via one of the two possible reaction pathways, polar addition (PL) and electron transfer (ET)-radical coupling (RC) sequence (equation 5). Current reaction design for the synthetic purpose of additions of common nucleophiles to aldehydes and ketones is mostly based on the polar mechanism, but apparently the ET process is involved in some reactions of, for example, Grignard reagents Mechanistically there are three possible variations the PL pathway, the ET rate-determining ET-RC route and the RC rate-determining ET-RC route. 

The presence of a stereogenic center on the aldehyde can strongly inlinence the diastereoselectivity in allylboration reactions, especially if this center is in the a-position. Predictive rules for nucleophilic addition on snch a-snbstitnted carbonyl substrates such as the Felkin model are not always snitable for closed transition structures.For a-substituted aldehydes devoid of a polar substituent, Roush has established that the minimization of ganche-ganche ( syn-pentane ) interactions can overrule the influence of stereoelectronic effects. This model is valid for any 3-monosubstituted allylic boron reagent. For example, althongh crotylboronate (E)-7 adds to aldehyde 39 to afford as the major prodnct the diastereomer predicted by the Felkin model (Scheme 2), " it is proposed that the dominant factor is rather the minimization of syn-pentane interactions between the Y-snbstitnents of the allyl unit and the a-carbon of the aldehyde. With this... 

One of the most general and useful reactions of alkenes and alkynes for synthetic purposes is the addition of electrophilic reagents. This chapter is restricted to reactions which proceed through polar intermediates or transition states. Several other classes of addition reactions are also of importance, and these are discussed elsewhere. Nucleophilic additions to electrophilic alkenes were covered in Chapter 1, and cycloadditions involving concerted mechanisms will be encountered in Chapter 6. Free-radical addition reactions are considered in Chapter 10. 

In addition to the choice of Lewis acid, added common ion salt, and temperature, the fast equilibrium between active and dormant species can be fostered by including additional nucleophiles (separate from the nucleophilic counterion) in the reaction system and by variations in solvent polarity. Nucleophiles act by further driving of the dynamic equilibrium toward the covalent species and/or decreasing the reactivity of ion pairs. Nucleophilic counterions and added nucleophiles work best in nonpolar solvents such as toluene and hexane. Their action in polar solvents is weaker because the polar solvents interact with the nucleophiles and nucleophilic counterions, as well as the ion pairs. Polar solvents such as methylene... 

---