Poisons labels

Production and Shipment. Estimated adiponitrile production capacities in the U.S. in 1992 were about 625 thousand metric tons and worldwide capacity was in excess of lO metric tons. The DOT/IMO classification for adiponitrile is class 6.1 hazard, UN No. 2205. It requires a POISON label on all containers and is in packing group III. Approved materials of constmction for shipping, storage, and associated transportation equipment are carbon steel and type 316 stainless steel. Either centrifugal or positive displacement pumps may be used. Carbon dioxide or chemical-foam fire extinguishers should be used. There are no specifications for commercial adiponitrile. The typical composition is 99.5 wt % adiponitrile. Impurities that may be present depend on the method of manufacture, and thus, vary depending on the source. 

Shipment of hydrazine solutions is regulated in the United States by the Department of Transportation (DOT) which classifies all aqueous solutions between 64.4 and 37% N2H4 as "Corrosive" materials with a subsidiary risk of "Poison". Hydrazine has been identified by both the Environmental Protection Agency and the DOT as a hazardous material and has been assigned a reportable quantity (RQ) of 0.450 kg (1 lb) if spilled. Dmms for the shipment of these solutions must bear both the DOT specification "Corrosive" and "Poison" labels in association with the markings "RQ Hydrazine Aqueous Solution UN 2030." Aqueous solutions of 37% concentration or less are a hazard Class 6.1, UN 3293, Packing Group III and require "Keep Away From Food" placards and labels. 

Aniline is shipped in tank tmck and tank car quantities and is classified by the U.S. Department of Transportation (DOT) as a Class B poison (UN 1547), and must carry a poison label. 

Many silver compounds are unstable to light, and are thus shipped ia brown glass or opaque plastic bottles. Silver compounds that are oxidants, eg, silver nitrate and iodate, must be so identified according to U.S. Department of Transportation (DOT) regulations. Compounds such as silver cyanide, which is toxic owiag to its cyanide content, must carry a poison label. However, most silver compounds are essentially nontoxic. 

The time-weighted, 8-h average limit for exposure to bromine pentafluoride is 0.1 ppm (67). Materials of constmction suitable for use with the bromine fluorides include nickel. Monel metal, or Teflon. For shipping, bromine trifluoride and pentafluoride are classified as oxidizers under DOT regulations. The trifluoride also requires a poison label. 

Methyl bromide is sold both as the essentially pure compound, 99.5% minimum, with not more than 0.010% water and 0.001% acidity as HBr, and with small amounts of chloropicrin [76-06-2], CCI2NO2. During 1992 methyl bromide in tank cars was priced at 1.70/kg. Methyl bromide is suppHed in 37,850- and 60,560-L tank cars and in 12,220-L ISO cylinders. Repackagers supply methyl bromide in 0.45 kg or 0.68 kg cans for such appHcations as fumigating tobacco seed beds. Alone or in formulations, it is classified as a poison, class B, and requires a poison label. 

All DANGER-POISON labels and some WARNING and CAUTION labels will contain a note to physicians describing the appropriate medical procednres for poisoning emergencies and may identify an antidote. 

For a package containing Chlorine, the word CHLORINE may be used in the place of the word POISON on the POISON label, provided the letter size and color for CHLORINE are the same as those required for POISON. Additionally, a CHLORINE label may be used in place of the NON-FLAMMABLE GAS and POISON labels otherwise required for Chlorine. 

PG 111 — may be marked adjacent to the poison label on packages containing Division 6.1 PG III material and... 

---