Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Physical conversion pellet fuels

Particle Size Reduction. Changes in the physical characteristics of a biomass feedstock often are requited before it can be used as a fuel. Particle size reduction (qv) is performed to prepare the material for direct fuel use, for fabrication into fuel pellets, or for a conversion process. Particle size of the biomass also is reduced to reduce its storage volume, to transport the material as a slurry or pneumatically, or to faciHtate separation of the components. [Pg.16]

The objectives of this project are consistent with the objectives (1) and (4) above. The general objective of this project has been to verify a new measurement method to analyse the thermochemical conversion of biofuels in the context of PBC, which is based on the three-step model mentioned above. The sought quantities of the method are the mass flow and stoichiometry of conversion gas, as well as air factors of conversion and combustion system. One of the specific aims of this project is to find a physical explanation why it is more difficult to obtain acceptable emissions from combustion of fuel wood than from for example wood pellets for the same conditions in a given PBC system. This project includes the following stages ... [Pg.14]

Reduction in physical size is often required before biomass is used as a fuel or feedstock. Size-reduction techniques are employed to prepare biomass for direct fuel use, fabrication into fuel pellets, cubes, and briquettes, or conversion. Smaller particles and pieces of biomass reduce its storage volume, facilitate handling of the material in the solid state and transport of the material as a slurry or pneumatically, and sometimes permit ready separation of components such as bark and whitewood. The size of the pieces or particles can be critical when drying is used because the exposed surface area, which is a function of physical size, can determine drying time and the methods and conditions needed to remove moisture. There are a few exceptions where size reduction is not needed, such as in whole-tree burning. [Pg.173]


See other pages where Physical conversion pellet fuels is mentioned: [Pg.78]    [Pg.169]    [Pg.8]    [Pg.261]   


SEARCH



Fuel conversion

Physical conversion

© 2024 chempedia.info