Palladium catalysts, polymeric

Polymerization by G—G Goupling. An aromatic carbon—carbon coupling reaction has been employed for the synthesis of rigid rod-like polyimides from imide-containing dibromo compounds and aromatic diboronic acids ia the presence of palladium catalyst, Pd[P(CgH )2]4 (79,80). 

Another appHcation for this type catalyst is ia the purification of styrene. Trace amounts (200—300 ppmw) of phenylacetylene can inhibit styrene polymerization and caimot easily be removed from styrene produced by dehydrogenation of ethylbenzene using the high activity catalysts introduced in the 1980s. Treatment of styrene with hydrogen over an inhibited supported palladium catalyst in a small post reactor lowers phenylacetylene concentrations to a tolerable level of <50 ppmw without significant loss of styrene. 

The coupling reaction of aryl-alkenyl halides with alkenes in the presence of a palladium catalyst and a base is known as the Heck coupling (Scheme 9.4).6 Since the early 1980s, this type of coupling reaction has been used for die syndiesis of poly(arylenevinylene) and related polymers by polymerization of AB- or AA/BB-type of monomers (Scheme 9.5).7... 

Polymerization using the Stille coupling, the cross-coupling of aryl-alkenyl halides with organotins in the presence of palladium catalysts (Scheme 9.10),13 appeared in 1989 (Scheme 9.11).14 The low nucleophilicity of organotins makes it possible to use functionalized monomers for the polymerization.15... 

At about die same time, die application of the Suzuki coupling, the crosscoupling of boronic acids widi aryl-alkenyl halides in die presence of a base and a catalytic amount of palladium catalyst (Scheme 9.12),16 for step-growth polymerization also appeared. Schliiter et al. reported die synthesis of soluble poly(para-phenylene)s by using the Suzuki coupling condition in 1989 (Scheme 9.13).17 Because aryl-alkenyl boronic acids are readily available and moisture stable, the Suzuki coupling became one of die most commonly used mediods for die synthesis of a variety of polymers.18... 

Uozumi Y (2004) Recent Progress in Polymeric Palladium Catalysts for Organic Synthesis. 242 77-112... 

Figure 7. SEM and XRMA microphotographs of palladium catalysts supported on the amphiphilic resin made by DMAA, MTEA, MBAA (cross-linker) [30]. Microphotographs (a) and (b) show an image and the radial palladium distribution after uptake of [Pd(OAc)2] from water/acetone the precursor diffuses only into the outer layer of the relatively little swollen CFP after reduction the nanoclusters remain close to the edge of the catalyst beads. Microphotographs (c) and (d) show the radial distribution of sulfur and palladium, respectively, after uptake of [PdCU] from water after reduction palladium is homogenously distributed throughout the catalyst particles. This indicates that under these conditions the CFP was swollen enough to allow the metal precursor to readily penetrate the whole of polymeric mass. (Reprinted from Ref. [30], 2005, with permission from Elsevier.)...

The reduction of palladium(II) with an alcoholic solution of NaBH4 [101] or by treatment in situ of the methanol-swollen material under hydrogen [129] yielded a supported palladium catalyst, referred to as self supported by the authors [101,129]. The same co-polymerization reaction was carried out inside the nanopores of a DMF-swollen gel-type resin made by DMA and MBAA (crosslinker, 4% mol) [101,129], thus obtaining a sequential IPN [131]. Also this material was transformed into a... 

Keywords Acrylate comonomers, Ethylene, Mechanism, Palladium catalysts, Polar groups, Polymerization catalysis, Random copolymers... 

Polybutadiene and polyisoprene are produced and used mainly as synthetic rubber on an industrial scale by using transition metal catalysts, especially titanium- and nickel-based ones. By contrast, only minor attention has been paid to the palladium-catalyzed polymerization of butadiene. A mixture of 1,2-polybutadiene and trans- and c/s-l, 4-polybutadiene was obtained by using PdCl2 as a catalyst (7, 2). 

The initiation of polymerizations by metal-containing catalysts broadens the synthetic possibilities significantly. In many cases it is the only useful method to polymerize certain kinds of monomers or to polymerize them in a stereospecific way. Examples for metal-containing catalysts are chromium oxide-containing catalysts (Phillips-Catalysts) for ethylene polymerization, metal organic coordination catalysts (Ziegler-Natta catalysts) for the polymerization of ethylene, a-olefins and dienes (see Sect. 3.3.1), palladium catalysts and the metallocene catalysts (see Sect. 3.3.2) that initiate not only the polymerization of (cyclo)olefins and dienes but also of some polar monomers. 

Further intramolecular reaction of the poly(phenylene)-type polymer leads to more condensed polymers. Tour synthesized polymer 84 bearing a carbonyl moiety and a protected amino group in the phenylene rings by the reaction of boronate 83 and a dibromobenzene monomer. The polymerization takes place in the presence of a palladium catalyst in DME-H2O at 85 °C to give 84 that showed 3/n = 9850-28400 = 1.85-3.70) in 63-97% yields. The resulting polymer 84 is... 

Polymerization with alkynyl tin reagents also proceeds smoothly as shown by Sterzo, Wright, and Tamao (Equations (60)-(62)). The reaction takes place in the presence of a palladium catalyst, such as Pd(PPh3)4,... 

The Tsuji-Trost-type reaction is applicable to bifunctional vinyl epoxide 144 and 1,3-diketone using a palladium catalyst as demonstrated by Koizumi, who obtained polymer 145 (Equation (67)). The reaction proceeds at 0 °C to a reflux temperature of THE. The resulting polymer 145 is isolated in a quantitative yield. The molecular weight of 145 is ca. 3000 (PDI = 2.0-2.7) when 5 mol% of Pd(PPh3)4 is employed as a catalyst. Use of Pd2(dba)3 with several bidentate phosphines such as dppe, dppp, dppb, and dppf is also effective for the polymerization reaction. Propargyl carbonate 146 also reacts with bisphenols in the presence of a palladium catalyst to afford polyethers 147 via carbon-oxygen bond formation at s - and r/) -carbon atoms (Equation (68)). 

Ethylene is also employed as an olefmic component of the Mizoroki-Heck polymerization. Organic dihalides thus couple with ethylene in the presence of a palladium catalyst to afford PAV-type polymers 161 and 162, as shown in Equations (77) and (78). ... 

---