Packaging metric system

The requirement of paragraph (2) that the statement of net quantity of contents include a statement in terms of the SI metric system shall not apply to foods that are packaged at the retail store level. 

Cosmetics marketed in the US must comply with the labelling regulations under the FD C Act and the FPLA. The principal display panel, i.e. the part of a label that is most likely to be displayed, presented, shown or examined under customary conditions of display for retail sale , shall bear a statement identifying the product and an accurate statement of the net quantity, using US measures and additionally the metric system. The latter declaration must be distinct, placed at the bottom of the panel in line, generally parallel to the base on which the package rests. 

To conclude this first part, the choice of the sodium treatment solution for Greys Malville is based on a so-called on-line drainage system (no buffer storage) using tools fabricated for this operation, followed in real time by treatment at 6 metric tonnes/day in two caustic soda transformation reactors (NOAH process) nearly identical to the SDP ones. A total of 13 860 m of caustic soda from primary sodium will be mixed with cement to make packages (26 400 cubes of 1 m ) that will be stored on the surface since they are only very slightly radioactive (< 100 Bq/g), and this in less than 2 years. 

Another approach is to do a periodic audit of 5 to 10 management of change packages to evaluate the effectiveness of the MOC/PSSR system. This provides a quality control metric for comparison over time. 

The purpose of the approach is to create a link between available system information and a reliability metric. The aim is not to find the true reliability of a system but rather use the reliability metric as a mean or a tool for adjusting the analysis work. The methods for identifying and collecting system information was described in Chapter 2 and they are performed in the three first work packages of the project. For the creation of a coimection between the input and the reliability metric there are several viable approaches. 

---