Oxidative addition precursors

Aryl halides are frequently prepared from the corresponding aryldiazonium salts by diazotation procedures. However, diazonium salts can be subjected directly to very mild Heck arylation conditions, which deliver coupled products (entry 19). Preferably, the reaction is executed in nonaqueous solvents such as acetonitrile, acetone, or methylene chloride with sodium acetate as base and with palladiumbis(dibenzylideneacetone) as catalyst. Alternatively, a combination of the amine and f-butyl nitrite, in a mixture of acetic acid and monochloroacetic acid, can provide the desired product directly, which makes the isolation of a diazonium salt unnecessary (entry 20). " It is also possible to use aromatic acid anhydrides as oxidative addition precursors (entry 21). Clearly, anhydrides are very interesting starting materials for a number of Heck reactions due to price and absence of halide salt formation. 

In the two-step procedure, the oxide additive precursors were hydrolyzed in an appropriate solvent (methanol was used in this procedure for acetylacetonate precursors). AI2O3 aerogel, already prepared, was introduced into this solution which was then supercritically dried. 

Figure Bl.25.9(a) shows the positive SIMS spectrum of a silica-supported zirconium oxide catalyst precursor, freshly prepared by a condensation reaction between zirconium ethoxide and the hydroxyl groups of the support [17]. Note the simultaneous occurrence of single ions (Ff, Si, Zr and molecular ions (SiO, SiOFf, ZrO, ZrOFf, ZrtK. Also, the isotope pattern of zirconium is clearly visible. Isotopes are important in the identification of peaks, because all peak intensity ratios must agree with the natural abundance. In addition to the peaks expected from zirconia on silica mounted on an indium foil, the spectrum in figure Bl. 25.9(a)...

Organometallic complexes of copper, silver, and gold are ideal precursors for carbene complexes along with some C- and N-coordinated species. Their reactivity pattern, in particular in oxidative addition reactions, was the most comprehensively studied. 

This synthetic approach is known from the synthesis of L M(alkene)H compounds from LnM(CO)alkane precursors and can easily be applied to the analogous silyl complexes. The Si—H bond even shows an increased activity for oxidative addition reactions [42, 43]. 

Finally, new tricyclic hexacoordinated phosphoranes with internal P-N coordination were synthesized by Swamy and coworkers by oxidative addition of cyclic phosphite precursors with quinones or with a combination of diols and (z-Pr)2NCl [57, 58]. Various ring sizes from five to eight membered were obtained showing the generality of the approach. A selection of compounds (47a-47e) is presented in Fig. 8. 

The major synthetic routes to transition metal silyls fall into four main classes (1) salt elimination, (2) the mercurial route, a modification of (1), (3) elimination of a covalent molecule (Hj, HHal, or RjNH), and (4) oxidative addition or elimination. Additionally, (5) there are syntheses from Si—M precursors. Reactions (1), (2), and (4), but not (3), have precedence in C—M chemistry. Insertion reactions of Si(II) species (silylenes) have not yet been used to form Si—M bonds, although work may be stimulated by recent reports of MejSi 147) and FjSi (185). A new development has been the use of a strained silicon heterocycle as starting material (Section II,E,4). 

V (2 ), Cr ( ), Zr (1 ), or Ta (1 ). The role of these promoters in the air cathode is unclear, and some have suggested that the active catalysts are alloys of the Ft with the transition metal (1,4) which form during heat-treatment of the oxide impregnated precursor. In the first section of this paper, we review the work from the Lawrence Berkeley Laboratory on the study of the mechanism of promotion of air cathode performance by these transition metal additives. 

Oxidative addition of PhlCl2 to gold(I) precursors has been used to prepare the acetimine derivatives [Au(NH=CMe2)Cl3] and [Au(NH=CMe2)2Cl2]C104 [36]. 

After formation of Pd(0) from the Pd(II) precursor, oxidative addition of the P-H bond could give a hydride complex. Insertion of the alkyne into either the Pd-P or Pd-H bond, followed by reductive eUmination, gives the product Consistent with this proposal, treatment of Pt(PEt3)3 with PH(0)(0Et)2 gave the P-H oxidative addition product 14, which reacted with phenylacetylene to give primarily (>99 1) the Markovnikov alkenylphosphonate (Scheme 5-18, Eq. 2). 

Recently, Y. Yamamoto reported a palladium-catalyzed hydroalkoxylation of methylene cyclopropanes (Scheme 6-25) [105]. Curiously, the catalysis proceeds under very specific conditions, i.e. only a 1 2 mixture of [Pd(PPh3)4] and P(o-tolyl)3 leads to an active system. Other combinations using Pd(0 or II) precursors with P(o-tolyl)3 or l,3-bis(diphenylphosphino)propane, the use of [Pd(PPh3)4] without P(o-tolyl)3 or with other phosphine ligands were all inefficient for the hydroalkoxylation. The authors assumed a mechanism in which oxidative addition of the alcohol to a Pd(0) center yields a hydrido(alkoxo) complex which is subsequently involved in hydropal-ladation of methylenecyclopropane. 

Several studies were performed in order to establish the mechaiusm (5-7). The currently accepted mechartism, presented in Scheme 26.1 for the Pd(BINAP) catalyzed amination, involves the formation of a complex, Pd(BINAP)2 from a catalyst precursor (usually Pd(OAc)2 or Pd2(dba)3) and ligand this complex lies outside the catalytic cycle and undertakes dissociation of one BINAP to form Pd(BINAP) the following steps are the oxidative addition of the aryl halide to the Pd(BINAP), reaction with amine and base, and the reductive elimination of the product to reform Pd(BlNAP). 

Oxidative addition of a silyl-protected 4-(bromomethyl)phenol precursor to (tme-da)Pd(II)Me2 (tmeda = tetramethylethylenediamine), followed by ethane reductive elimination, resulted in formation of the benzylic complex 16 (Scheme 3.10). Exchange of tmeda for a diphosphine ligand (which is better suited for stabilizing the ultimate Pd(0) QM complex), followed by removal of the protecting silyl group with fluoride anion, resulted in the expected p-QM Pd(0) complex, 17, via intermediacy of the zwitterionic Pd(II) benzyl complex. In this way a stable complex of p-BHT-QM, 17b, the very important metabolite of the widely used food antioxidant BHT20 (BHT = butylated hydroxytoluene) was prepared. Similarly, a Pd(0) complex of the elusive, simplest /)-QM, 17a, was obtained (Scheme 3.10). 

The platinum(0) complex [Pt(PhNO)(PPh3)2] reacts with C02 to afford the metallacyclic nitroso species [Pt 0N(Ph)C(0)0 (PPh3)2] (60), the first example of insertion of C02 into a Pt—N bond.186 Other unsaturated carbon compounds such as CS2 and electrophilic alkenes and alkynes react similarly. The diradical peril uoro-/V,/V -dimethylethane-l,2-bis(amino-oxyl) reacts readily by oxidative addition to the platinum(0) precursor Pt(PPh3)4 to afford the corresponding platinum(lI)-nitroso complex containing a seven-membered chelate ring (61). The resulting complex is stable in air for several days at room temperature.187... 

Other alkylgold(III) compounds are [Au2(/r-X)2(CF3)4] (X = Br, I) synthesized by co-condensation of gold with CF3Br and CF3I, respectively, and may be sublimed at room temperature.1654 Trifluoromethylated compounds are potentially useful precursors for CVD studies as they are expected to show enhanced volatility.1655 m-[Au(CF3)2I(PMc3)] is formed in quantitative yield by oxidative addition of trifluoromethyl iodide to [Au(CF3)(PMe3)], the reaction is proposed to proceed via radical intermediates.1524,1656... 

The catalytic cycle for hydroboration is now widely accepted and direct examples of several intermediate species have been isolated and well characterized (Scheme 3).5-7 These now include (j-borane complexes, which have in some instances been found to be catalytic precursors for hydroboration.8-10 Oxidative addition of an H—B bond to a coordinatively unsaturated metal fragment... 

Hartwig has reported an intramolecular/intermolecular process affording the 3-aryloxindoles 105 (Scheme 32).115 The intermolecular arylation of acetanilide derivative 104 is slower than the intramolecular arylation to form the oxindole. Thus, the overall transformation starts with cyclization followed by intermolecular arylation of indole. In order to slow down the intermolecular process and speed up the intramolecular reaction, chloroarene and bromine-substituted acetanilide precursors are used according to their respective reactivity with palladium(O) in the oxidative addition process. 

---