Other Useful Information Obtained by Probes

Other Useful Information Obtained by Probes Both EIS and electrochemical noise probes can be used to determine information about the reactions that affect corrosion. Equivalent circuit analysis, when properly applied by an experienced engineer, can often give insight into the specifics of the corrosion reactions. Information such as corrosion product layer buildup, or inhibitor effectiveness, or coating breakdown can be obtained directly from analysis of the data from EIS or indirectly from electrochemical noise data. In most cases, this is merely making use of methodology developed in the corrosion laboratory. 

Oxidation-reduction potential Because of the interest in bacterial corrosion under anaerobic conditions, the oxidation-reduction situation in the soil was suggested as an indication of expected corrosion rates. The work of Starkey and Wight , McVey , and others led to the development and testing of the so-called redox probe. The probe with platinum electrodes and copper sulphate reference cells has been described as difficult to clean. Hence, results are difficult to reproduce. At the present time this procedure does not seem adapted to use in field tests. Of more importance is the fact that the data obtained by the redox method simply indicate anaerobic situations in the soil. Such data would be effective in predicting anaerobic corrosion by sulphate-reducing bacteria, but would fail to give any information regarding other types of corrosion. 

The above theory is usually called the generalized linear response theory because the linear optical absorption initiates from the nonstationary states prepared by the pumping process [85-87]. This method is valid when pumping pulse and probing pulse do not overlap. When they overlap, third-order or X 3 (co) should be used. In other words, Eq. (6.4) should be solved perturbatively to the third-order approximation. From Eqs. (6.19)-(6.22) we can see that in the time-resolved spectra described by x"( ), the dynamics information of the system is contained in p(Af), which can be obtained by solving the reduced Liouville equations. Application of Eq. (6.19) to stimulated emission monitoring vibrational relaxation is given in Appendix III. 

On the other hand, additional spectroscopic information can be obtained by making use of this technique The Fourier transform of the frequency-filtered transient (inset in Fig. 8) shows that the time-dependent modulations occur with the vibrational frequencies of the A E and the 2 IIg state. In the averaged Na2+ transient there was only a vanishingly small contribution from the 2 IIg state, because in the absence of interference at the inner turning point ionization out of the 2 IIg state is independent of intemuclear distance, and this wavepacket motion was more difficult to detect. In addition, by filtering the Na2+ signal obtained for a slowly varying pump-probe delay with different multiples of the laser frequency, excitation processes of different order may be resolved. This application is, however, outside the scope of this contribution and will be published elsewhere. 

Complex structures have frequently been probed using photophysical methods such as fluorescence or phosphorescence of intrinsic or added probes. There have been a few intriguing reports of the use of mesogen fluorescence as an intrinsic probe of LC polymer structures to obtain structural information that could not be obtained by other methods. 

---