Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Osmium mechanisms

A compound which is a good choice for an artificial electron relay is one which can reach the reduced FADH2 active site, undergo fast electron transfer, and then transport the electrons to the electrodes as rapidly as possible. Electron-transport rate studies have been done for an enzyme electrode for glucose (G) using interdigitated array electrodes (41). The following mechanism for redox reactions in osmium polymer—GOD biosensor films has... [Pg.45]

There are also reactions which show stereoselectivity primarily because of mechanism rather than spatial bias of substrate. For instance, the conversion of an olefin to a 1,2-diol by osmium tetroxide mechanistically is a cycloaddition process which is strictly suprafacial. The hydroxylation transform has elements of both substrate and mechanism control, as illustrated by the retrosynthetic conversion of 146 to 147. The validity of the retrosynthetic removal of both... [Pg.48]

Osmium carbonyl (Os3(CO)i2) acts as a photoinitiator of vinyl polymerization [20], which can function without a halide additive. The mechanism of photoinitiation is by a hydrogen abstraction from monomer to pho-... [Pg.246]

The most widely used methods for the application of coatings of gold, silver and the platinum group metals (platinum, palladium, rhodium, iridium, ruthenium, osmium) to base metals are mechanical cladding and electroplating. [Pg.557]

Scheme 3. The Criegee mechanism for the osmium tetroxide mediated dihydroxylation reaction. Scheme 3. The Criegee mechanism for the osmium tetroxide mediated dihydroxylation reaction.
Dendrimers can be constructed from chemical species other than purely organic monomers. For example, they can be built up from metal branching centres such as ruthenium or osmium with multidentate ligands. The resulting molecules are known as metallodendrimers. Such molecules can retain their structure by a variety of mechanisms, including complexation, hydrogen bonding and ionic interactions. [Pg.135]

The co-condensation reactions described above have led to the formation of interesting new compounds and sometimes very unexpected products. The nature of the products formed for example in the osmium atom experiments indicate high degrees of specificity can be achieved. However, the detailed mechanisms of the co-condensation reactions are not known. It seems most likely that in all cases the initial products formed at the co-condensation temperature are simple ligand-addition products and that the insertion of the metal into the carbon-hydrogen bond occurs at some point during the warming up process. In support of this hypothesis we note the virtual absence of any... [Pg.277]

Cofacial ruthenium and osmium bisporphyrins proved to be moderate catalysts (6-9 turnover h 1) for the reduction of proton at mercury pool in THF.17,18 Two mechanisms of H2 evolution have been proposed involving a dihydride or a dihydrogen complex. A wide range of reduction potentials (from —0.63 V to —1.24 V vs. SCE) has been obtained by varying the central metal and the carbon-based axial ligand. However, those catalysts with less negative reduction potentials needed the use of strong acids to carry out the catalysis. These catalysts appeared handicapped by slow reaction kinetics. [Pg.475]

Scheme 8.2 Mechanism for the hydrogenation of ethylene catalyzed by silica-supported osmium clusters (CO ligands omitted for clarity). Scheme 8.2 Mechanism for the hydrogenation of ethylene catalyzed by silica-supported osmium clusters (CO ligands omitted for clarity).
The kinetic investigation of this reaction reveals the reaction is first-order in substrate, catalyst and hydrogen concentration, and thus yields the rate law r=kCat[Os][alkyne][H2]. The proposed mechanism as given in Scheme 14.6 is based on the rate law and the coordination chemistry observed with these osmium complexes. [Pg.383]

This mechanism bears a close relationship to the polymerization of polyhedral boranes. Certainly there is clear evidence for the formation of Fe(CO)4 from Fe(CO)5. The production of Fe2(CO)9 from Fe(CO)5 is catalyzed by light, but further polymerization of Fe2(CO)9 to Fe3CO)I2 is not observed under these conditions. For the related osmium systems, there is some evidence for the formation of 082(00)9 from Os(CO)5, but irradiation of Os3(CO)J2 does not produce higher clusters although in the presence of molecules such as CO or CjH L) the compounds... [Pg.254]

This behavior, as well as complementary observations, can be explained on the basis of the reaction mechanism depicted in Scheme 5.3. The main catalytic cycle involves three successive forms of the enzyme in which the iron porphyrin prosthetic group undergoes changes in the iron oxidation state and the coordination sphere. E is a simple iron(III) complex. Upon reaction with hydrogen peroxide, it is converted into a cation radical oxo complex in which iron has a formal oxidation number of 5. This is then reduced by the reduced form of the cosubstrate, here an osmium(II) complex, to give an oxo complex in which iron has a formal oxidation number of 4. [Pg.312]

The reaction mechanisms of these transition metal mediated oxidations have been the subject of several computational studies, especially in the case of osmium tetraoxide [7-10], where the controversy about the mechanism of the oxidation reaction with olefins could not be solved experimentally [11-20]. Based on the early proposal of Sharpless [12], that metallaoxetanes should be involved in alkene oxidation reactions of metal-oxo compounds like Cr02Cl2, 0s04 and Mn04" the question arose whether the reaction proceeds via a concerted [3+2] route as originally proposed by Criegee [11] or via a stepwise [2+2] process with a metallaoxetane intermediate [12] (Figure 2). [Pg.254]

This mechanistic question is one of the examples of the success of density functional theory methods in organometallic chemistry. Earlier work on the reaction mechanism could not discriminate between the two alternatives. Analysis of the different orbitals based on extended Hiickel calculations came to the result that the [3+2] pathway is more likely, but could not exclude the possibility of a [2+2] pathway [13]. Similar conclusions where obtained from the results of Hartree-Fock calculations in combination with QCISD(T) single point calculations [21], Attempts to use Ru04 as a model for osmium tetraoxide indicated that the formation of an oxetane is less favorable compared to the [3+2] pathway, but still possible [22, 23],... [Pg.256]

Generally, the yields of the diols are comparable with those obtained by the classical osmium tetroxide procedure, but are lower when the diol has a high degree of solubility in water. Under such circumstances, further oxidative cleavage occurs in the aqueous phase to produce the carboxylic acids [18]. The kinetics and mechanism of the oxidation of a,p-unsaturated carboxylic acids with permanganate in the presence of phase-transfer catalysts has been studied [25]. [Pg.417]

Initially, it was thought more likely that the electron poor metal atom would be involved in the electrophilic attack at the alkene and also the metal-carbon bond would bring the alkene closer to the chiral metal-ligand environment. This mechanism is analogous to alkene metathesis in which a metallacyclobutane is formed. Later work, though, has shown that for osmium the actual mechanism is the 3+2 addition. Molecular modelling lends support to the 3+2 mechanism, but also kinetic isotope effects support this (KIEs for 13C in substrate at high conversion). Oxetane formation should lead to a different KIE for the two alkene carbon atoms involved. Both experimentally and theoretically an equal KIE was found for both carbon atoms and thus it was concluded that an effectively symmetric addition, such as the 3+2 addition, is the actual mechanism [22] for osmium. [Pg.312]

Further supporting evidence for this type of a mechanism comes from the consideration of an analogous reaction, the oxidation of alkenes by osmium tetroxide, which also produces cis-diols. In this reaction the... [Pg.86]


See other pages where Osmium mechanisms is mentioned: [Pg.40]    [Pg.563]    [Pg.76]    [Pg.190]    [Pg.1058]    [Pg.263]    [Pg.413]    [Pg.1901]    [Pg.138]    [Pg.125]    [Pg.91]    [Pg.168]    [Pg.52]    [Pg.55]    [Pg.16]    [Pg.891]    [Pg.551]    [Pg.223]    [Pg.68]    [Pg.70]    [Pg.202]    [Pg.562]    [Pg.571]    [Pg.548]    [Pg.216]    [Pg.276]    [Pg.108]    [Pg.260]    [Pg.311]    [Pg.164]    [Pg.77]   
See also in sourсe #XX -- [ Pg.170 ]




SEARCH



Mechanism of Osmium-Catalyzed Dihydroxylations

Osmium mechanical properties

Osmium tetroxide alkenes, mechanism

© 2024 chempedia.info