Osmium alloys chlorides

Phillips and Timms [599] described a less general method. They converted germanium and silicon in alloys into hydrides and further into chlorides by contact with gold trichloride. They performed GC on a column packed with 13% of silicone 702 on Celite with the use of a gas-density balance for detection. Juvet and Fischer [600] developed a special reactor coupled directly to the chromatographic column, in which they fluorinated metals in alloys, carbides, oxides, sulphides and salts. In these samples, they determined quantitatively uranium, sulphur, selenium, technetium, tungsten, molybdenum, rhenium, silicon, boron, osmium, vanadium, iridium and platinum as fluorides. They performed the analysis on a PTFE column packed with 15% of Kel-F oil No. 10 on Chromosorb T. Prior to analysis the column was conditioned with fluorine and chlorine trifluoride in order to remove moisture and reactive organic compounds. The thermal conductivity detector was equipped with nickel-coated filaments resistant to corrosion with metal fluorides. Fig. 5.34 illustrates the analysis of tungsten, rhenium and osmium fluorides by this method. 

When present in various compounds or alloys, osmium is conveniently estimated by ignition in a current of oxygen, collection in alcoholic alkali of the volatile tetroxide, and reduction with formaldehyde. The reduction product first forms a colloid, but is gradually precipitated and converted in metallic osmium by reduction in hydrogen at 230° to 250° C.3 Or the alcoholic solution may be treated with ammonium chloride and the precipitated osmyl diammine chloride reduced to metal in hydrogen. 

---