Octane number blending index

The process has been applied to kerosene to improve the smoke point and for desulfurization. It is applied to selected naphthas for the recovery of high-octane-number blending stocks and for the recovery of lacquer diluents (aromatic hydrocarbons). Diesel fuels of high Diesel Index and ignition quality can be made from selected gas oils. 

The process data are summarized in Table XI. The operation was conducted at a pressure of 250 pounds per square inch and a temperature of 934° F. The depentanized liquid product was fractionated into three cuts called preaviation, aviation, and postaviation blending agents. The yields of these three products were 22.8, 33.5, and 12.6 volume %, respectively. The aviation blending agent had an F-3 blending octane number (1-C) of 100 and an F-4 blending index number (3-C) of 216. The clear research oc-... 

The boiling point, refractive index, and density of the olefin derivative of any paraffin were shown, by use of Table III, to stand in the onier of their olefin type. Table X contains the engine data of the olefin derivatives of 2-methylpentane and 3-methylpentane, recorded in the order of their olefin type. No consistent relations between octane numbers or critical compression ratios are obvious—but the blending octane numbers of these branched olefins, as measured by both the research and Motor methods, do generally stand in the order of their type. Two olefins of type III form exceptions, the exceptions being in one case too high and in the other case too low. 

Cetane number Diesel Index Blending octane number (Motor method) Character- ization Factor Boiling- point gravity number ... 

---