Nitrogen, tests for

Vitosh ML, Silva GH (1994) A rapid petiole sap nitrate-nitrogen test for potatoes. Commun Soil Sci Plan 25 183-190... 

When concentrated sulphuric acid is added to a nitrate in the presence of aqueous iron(II) sulphate, the nitrogen oxide liberated forms a brown complex [Fe(H20)5N0] which appears as a brown ring at the acid-aqueous interface (test for a nitrate, p 243). 

It is essential to use an excess of sodium, otherwise if sulphur and nitrogen are both present sodium thiocyanate, NaCNS, may be produced in the test for nitrogen it may give a red coloration with ferric iron but no Prussian blue since there will be no free cyanide ions. With excess of sodium the thiocyanate, if formed, will be decomposed ... 

When an organic compound is heated with a mixture of zinc powder and sodium carbonate, the nitrogen and halogens are converted into sodium cyanide and sodium hahdes respectively, and the sulphur into zinc sulphide (insoluble in water). The sodium cyanide and sodium hahdes are extracted with water and detected as in Lassaigne s method, whilst the zinc sulphide in the residue is decomposed with dilute acid and the hydrogen sulphide is identified with sodium plumbite or lead acetate paper. The test for nitrogen is thus not affected by the presence of sulphur this constitutes an advantage of the method. 

Prepare the zinc powder - sodium carbonate mixture by grinding together in a dry, clean mortar 25 g. of A.R. anhydrous sodium carbonate and 50 g. of the purest obtainable zinc powder. The reagent is unlikely to contain nitrogen, but traces of sulphur and halogens may be present. It is therefore essential to carry out a blank or control test for sulphur and halogens with every fresh batch of the mixture. 

Fig. 1. A multilayer coating dry chemistry test for blood urea nitrogen (BUN) where HI and I represent the acid base forms of a pH indicator, respectively...

Sodium a2idodithiocarbonate decomposes with evolution of nitrogen gas on addition of iodine, thus providing a useful quaHtative test for the presence of residual carbon disulfide ia aqueous solutions (25). 

Sulphur.—The presence of sulphur in organic compounds may be detected by heating the substance with a little metallic sodium or potassium. The alkaline sulphide, when dissolved in water, gives a violet colouration with a solution of sodium nitro-prusside. Heat a fragment of gelatine with a small piece of potassium in a test-tube until the bottom of the tube is red hot, and place it m a small beaker of water as described in the test for nitrogen (p. 2). Filter the liquid and add a few drops of sodium nitroprusside solution. 

An overview of the most important quaternary ammonium salts tested for possible applicability in zinc-bromine batteries is presented in Table 2. A rough classification has been applied according to the substance classes of the substituents attached to the nitrogen. 

The Results of Long-Term Storage Tests For Compatability of Nitrogen Tetroxide With Various Spacecraft Materials , SR No 2, JPL Contract No 951581 (NAS7-100) (1967)... 

Pollard s Test for Stability of Propellants. This test, proposed in 1924—25, is based upon the action of nitric peroxide on colloidal Ag oxide Procedure. A current of air is passed over a sample of proplnt in storage into a colloidal soln of Ag oxide. If free nitrogen peroxide is present, it reacts with the colloid and decreases the amt of light diffused by it. The larger the decrease, the higher the amt of N02 present, and the more decompd is the proplnt Ref Reilly (1938), 80... 

Thermodynamic Consistency Test for Carbon Dioxide (I)-Nitrogen (2) at 0°C... 

The second test for the mechanism shown in Scheme 8-8 is to apply equation (c) to (8-10) with kinetic data for dediazoniations with varying concentrations [N2] of molecular nitrogen. As the solubility of N2 is quite low in most solvents, kinetic measurements must be made under N2 pressure. The dediazoniation reaction has a... 

---