Nickel aryl halide coupling

In a related reaction, aryl halides couple with vinyl tin reagents to form styrene derivatives in the presence of a nickel catalyst, for example, ... 

Biphenyl bond formation has been achieved in the diiodobiaryl derivative 41 by an intramolecular aryl halide coupling reaction promoted by tetrakis(tri-phenylphosphine) nickel. This short and efficient route gave the dibenzazonine 42 in good yield (42) (Scheme 9). In a similar way, tetrasubstituted derivative 43 was successfully coupled with the more easily prepared tris(triphenylphos-phine)nickel, giving 44 in 62% yield. Subsequent debenzylation led to the most efficient synthesis of dibenzazonine 35a reported to date (43). 

Ullmann reaction Semmelhack (4, 33) has shown that bis( 1,5-cyclo-octadiene)nickel(O) and tetrakis(triphenylphospine)nickel(0) are useful reagents for coupling of aryl halides (Ullmann reaction). However, these zerovalent nickel complexes are not easy to prepare and are extremely sensitive to moisture. Kende reasoned that the coordinatively unsaturated Ni(TPP)3 is actually the species involved and indeed found that aryl halides couple to biaryls in the presence of 1 eq. of this complex. Aryl halides with two orr/io-substituents do not couple. Otherwise, yields of biaryls are in the range of 60-80%. 

In comparison to the nickel-catalysed aryl halide coupling reactions, the palladium-catalysed analogues are not sensitive to the steric hindrances and to the presence of nitro group. The nickel(O) complexes are more reactive than the appropriate palladiums, and thus more effective in the reactions with the least reactive aryl chlorides. However, the palladium complexes are more convenient and selective, even in the cross-coupling reaction of two electronically different aryl halides. 

Other catalysts employed in the direct arylation of oxazole include copper and nickel. " Aryl halides can be employed under nonoxidative conditions through benzyne intermediate, and, as with palladium, an oxidant is needed to couple Ar-M species. In all cases, the arylated products are obtained in moderate to good yields. 

This reaction is similar to 13-1 and, like that one, generally requires activated substrates. With unactivated substrates, side reactions predominate, though aryl methyl ethers have been prepared from unactivated chlorides by treatment with MeO in HMPA. This reaction gives better yields than 13-1 and is used more often. A good solvent is liquid ammonia. The compound NaOMe reacted with o- and p-fluoronitrobenzenes 10 times faster in NH3 at — 70°C than in MeOH. Phase-transfer catalysis has also been used. The reaction of 4-iodotoluene and 3,4-dimethylphenol, in the presence of a copper catalyst and cesium carbonate, gave the diaryl ether (Ar—O—Ar ). Alcohols were coupled with aryl halides in the presence of palladium catalysts to give the Ar—O—R ether. Nickel catalysts have also been used. ... 

In a Kumada-Corriu reaction, an aryl halide is oxidatively coupled with a homogeneous nickel(ll)-phosphine catalyst [2], This species reacts with a Grignard reagent to give biaryl or alkylaryl compounds. Later, palladium-phosphine complexes were also successfully applied. By this means, stereospecific transformations were achieved. 

Nickel carbonyl is an extremely toxic substance, but a number of other nickel reagents with generally similar reactivity can be used in its place. The Ni(0) complex of 1,5-cyclooctadiene, Ni(COD)2, can effect coupling of allylic, alkenyl, and aryl halides. 

Nickel(II) salts are able to catalyze the coupling of Grignard reagents with alkenyl and aryl halides. A soluble 6 -phosphine complex, Ni(dppe)2Cl2, is a particularly effective catalyst.266 The main distinction between this reaction and Pd-catalyzed cross... 

The present reaction may be reasonably explained by the smooth oxidative addition of aryl halides to metallic nickel to give aryl nickel halides, followed by disproportionation to bisarylnickels, which upon reductive elimination afford the dehalogenative coupled products. Providing strong support for this mechanism, the intermediates, arylnickel halide and bisarylnickel (Ar=C F ), were isolated as the phosphine complexes. 

Nickel complexes also catalyze the coupling of aryl halides with thiolates. In one case, the phosphine ligand on the catalyst was generated in situ from 1,2-dibromobenzene and diphenylphosphine... 

The palladium-catalyzed formation of sulfides can generate polyphenylene sulfide from a dithiol and a dibromoarene, or from 4-bromobenzenethiol (Equation (38)).17 In 1984 Asahi Glass obtained patents for the formation of this polymer in the presence of palladium and nickel catalysts.125,126 In addition, Gingras reported palladium-catalyzed couplings of aryl halides and thiols to form discrete phenylene sulfide oligomers.127,128 A number of polyphenylene sulfide wires, ranging from dimeric to pentameric structures, were prepared by the palladium coupling, albeit in modest yields ... 

Although more hydrolytically sensitive than the phosphine boranes, diorganochlorophosphines can be more accessible than diorganophosphines and are not pyrophoric. Thus, the reaction of a chlorophosphine with an aryl halide or aryl triflate in the presence of zinc as a reducing agent and (DPPE)NiCl2 as catalyst provides a convenient procedure for P—C coupling (Equation (49)).150 A related nickel-catalyzed process driven by electrochemical reduction has also been reported 151... 

Scheme 6.44 Nickel-catalyzed cross-coupling of zirconocenes and aryl halides.

Nozaki-Hiyama-Kishi (NHK) reactions215,216 are well known and often employed as a useful method for the synthesis of natural products by coupling of allyl, alkenyl, alkynyl, and aryl halides or triflates with aldehydes. The organochromium reagents are prepared from the corresponding halides or triflates and chromium(ll) chloride, and are employed in polar aprotic solvents (THF, DMF, DMSO, etc.). Subsequently, it was found that nickel salts exhibited a significant catalytic effect on the formation of the C-Cr bond217,218 (Equation (19)). 

Catalytic processes based on the use of electrogenerated nickel(O) bipyridine complexes have been a prominent theme in the laboratories of Nedelec, Perichon, and Troupel some of the more recent work has involved the following (1) cross-coupling of aryl halides with ethyl chloroacetate [143], with activated olefins [144], and with activated alkyl halides [145], (2) coupling of organic halides with carbon monoxide to form ketones [146], (3) coupling of a-chloroketones with aryl halides to give O -arylated ketones [147], and (4) formation of ketones via reduction of a mixture of a benzyl or alkyl halide with a metal carbonyl [148]. 

Nickel(O) triphenylphosphine can be used to couple aryl halides and alkenes to synthesize substituted olefins [149], 1,2-bis[(di-2-propylphosphino)benzene]nick-el(0) can be used to couple aryl halides [150], and l,2-bis[(diphenylphos-phino)ethane]nickel(0) can be used to prepare benzoic acid from bromobenzene in the presence of carbon dioxide [151]. 

Recently, chloro-, bromo-, and iodoben-zenes have been subjected to electroreduction using Ni(0) complex mediators to yield biphenyl. NiCl2L2 and NiBr2L2 [L= P(Ph)3, (Ph)2PCH2CH2P(Ph)2] have been used as catalysts [259-265]. Pro-tic media such as alcohols, that is, methanol, ethanol or alcohol-water mixtures are found to be suitable solvents for achieving the electrosynthesis of biaryls from aryl halides according to a procedure that involves a catalytic process by nickel-2,2 -bipyridine complexes [266]. Electrochemical cross-coupling between... 

Scheme 72 Nickel-catalyzed coupling of aryl halides and alkenes.

Tab. 16 Nickel-catalyzed electroreductive coupling of a-chloroesters with aryl and vinyl halides [294]...

Biaryl synthesis from aryl halides is a more interesting reaction due to the value of these molecules and their difficult access by chemical methods. The first electrosyntheses were simultaneously done in 1979-80 by three groups [21-23] who used NiCljPPha (1-20%) as catalyst precursor in the presence of excess PPhs. Later, several groups investigated the use of bidentate phosphines like dppe associated with nickel in the synthesis of various biaryls, and notably 2,2 -bipyridine and of 2,2 -biquinoline from respectively 2-chloropyridine and 2-chloroquinoline [24], More recently new nickel complexes with l,2-bis(di-2-alkyl-phosphino)benzene have been studied from both fundamental and synthetic points of view [25]. They have been applied to the coupling of aryl halides. 

In the case of orthosubstituted aryl halides the corresponding arylnickel intermediate Ar2Nibpy is stable and should be oxidized to lead to the coupling product and regenerate the nickel(II) compound [27]. 

The cross coupling of two aryl halides is achieved by the use of organozinc intermediates. Reduction of one component is carried out in dimethylformamide using a stainless steel cathode and a zinc anode with the nickel catalyst in the pres-... 

Cross coupling between an aryl halide and an activated alkyl halide, catalysed by the nickel system, is achieved by controlling the rate of addition of the alkyl halide to the reaction mixture. When the aryl halide is present in excess, it reacts preferentially with the Ni(o) intermediate whereas the Ni(l) intermediate reacts more rapidly with an activated alkyl halide. Thus continuous slow addition of the alkyl halide to the electrochemical cell already charged with the aryl halide ensures that the alkyl-aryl coupled compound becomes the major product. Activated alkyl halides include benzyl chloride, a-chloroketones, a-chloroesters and amides, a-chloro-nitriles and vinyl chlorides [202, 203, 204], Asymmetric induction during the coupling step occurs with over 90 % distereomeric excess from reactions with amides such as 62, derived from enantiomerically pure (-)-ephedrine, even when 62 is a mixture of diastereoisomcrs prepared from a racemic a-chloroacid. Metiha-nolysis of the amide product affords the chiral ester 63 and chiral ephedrine is recoverable [205]. 

---