Nickel alloys bimetallic corrosion

Bimetallic corrosion of nickel-iron alloys may be of significance in welding operations. Ni-45 Fe alloys are used as filler materials in the welding of cast irons but the favourable area relationship of weld metal to base plate... 

Table 3.39 Bimetallic corrosion between nickel and nickel-iron alloys in l6<7o calcium chloride solution ...

Table 4.25 Bimetallic corrosion effects of nickel and nickel alloys (General guidance only other factors, including relative surface areas, often exert an important...

Galvanic corrosion or bimetallic corrosion is important to consider since most of the structural industrial metals and even the metallic phases in the microstructure alloys create galvanic cells between them and/or the a Mg anodic phase. However, these secondary particles which are noble to the Mg matrix, can in certain circumstances enrich the corrosion product or the passive layer, leading to a decrease or a control of the corrosion rate. Severe corrosion may occur in neutral solutions of salts of heavy metals, such as copper, iron and nickel. The heavy metal, the heavy metal basic salts or both plate out to form active cathodes on the anodic magnesium surface. Small amounts of dissolved salts of alkali or alkaline-earth metal (chlorides, bromides, iodides and sulfates) in water will break the protective film locally and usually lead to pitting (Froats et al., 1987 Shaw and Wolfe, 2005). 

---