Negative electron beam resist methacrylate

Poly(glycidyl methacrylate) (PGMA), a well-known negative electron beam resist first reported by Hirai et al. (55), actually functions as a positive-tone resist upon DUV exposure (Table 3.1) (56). The epoxide functionality responsible for cross-linking under electron beam exposure does not absorb in the DUV region, and the response of PGMA to DUV radiation is determined by the absorption due to the n — tt transition of the carbonyl chromo-... 

C The Epoxy Resists. The first negative tone electron beam resist materials with useful sensitivity were based on utilizing the radiation chemistry of the oxirane or epoxy moiety. The most widely used of these materials, COP (Figure 32) is a copolymer of glycidyl methacrylate and ethyl acrylate and was developed at Bell Laboratories (43,44). COP has found wide applicability in the manufacturing of photomasks. The active element... 

Typical resists include cyclized polyisoprene with a photosensitive crosslinking agent (ex bisazide) used in many negative photoresists, novolac resins with diazoquinone sensitizers and imidazole catalysts for positive photoresists, poly(oxystyrenes) with photosensitizers for UV resists, polysilanes for UV and X-ray resists, and polymethacrylates and methacrylate-styrenes for electron-beam resists (Clegg and Collyer, 1991). Also note the more recent use of novolac/diazonaphthoquinone photoresists for mid-UV resists for DRAM memory chips and chemically amplified photoacid-catalysed hydroxystyrene and acrylic resists for deep-UV lithography (Choudhury, 1997). 

---