Multi excitation

McCain MX, Willett RM, Brady DJ (2008) Multi-excitation Raman spectroscopy technique for fluorescence rejection. Opt Express 16(15) 10975-10991... 

W. Shuicai, H. Junfang, X. Dong, Z. Changjun, H. Xun, A three-wavelength Tnsapphire femtosecond laser for use with the multi-excited photosystem II. Appl. Phys. B 72, 819 (2001)... 

We note that the results in this subseetion give a measure for the efficiency of dendrimeric antennae when assuming that the excitation energy transfers through bonds and that multiple excitations don t play a role. However for multi-excitation system the MFPT of the first excitation to reach the core is shorter than the MFPT presented here, and depends on the number of excitation the process starts with. 

Fokker Bond Tester. An ultrasonic inspection technique commonly used for aircraft structures is based on ultrasonic spectroscopy [2]. Commercially available instruments (bond testers) used for this test operate on the principle of mechanical resonance in a multi-layer structure. A piezoelectric probe shown in Figure 3b, excited by a variable frequency sine signal is placed on the surface of the inspected structure. A frequency spectrum in the range of some tens of kHz to several MHz is acquired by the instrument, see Figure 3a. 

The Champ-Sons model is a most effieient tool allowing quantitative predictions of the field radiated by arbitrary transducers and possibly complex interfaces. It allows one to easily define the complete set of transducer characteristics (shape of the piezoelectric element, planar or focused lens, contact or immersion, single or multi-element), the excitation pulse (possibly an experimentally measured signal), to define the characteristics of the testing configuration (geometry of the piece, transducer position relatively to the piece, characteristics of both the coupling medium and the piece), and finally to define the calculation to run (field-points position, acoustical quantity considered). 

Time-of-flight mass spectrometers have been used as detectors in a wider variety of experiments tlian any other mass spectrometer. This is especially true of spectroscopic applications, many of which are discussed in this encyclopedia. Unlike the other instruments described in this chapter, the TOP mass spectrometer is usually used for one purpose, to acquire the mass spectrum of a compound. They caimot generally be used for the kinds of ion-molecule chemistry discussed in this chapter, or structural characterization experiments such as collision-induced dissociation. Plowever, they are easily used as detectors for spectroscopic applications such as multi-photoionization (for the spectroscopy of molecular excited states) [38], zero kinetic energy electron spectroscopy [39] (ZEKE, for the precise measurement of ionization energies) and comcidence measurements (such as photoelectron-photoion coincidence spectroscopy [40] for the measurement of ion fragmentation breakdown diagrams). 

The Goeppert-Mayer two- (or multi-) photon absorption, mechanism (ii), may look similar, but it involves intennediate levels far from resonance with one-photon absorption. A third, quasi-resonant stepwise mechanism (iii), proceeds via smgle- photon excitation steps involvmg near-resonant intennediate levels. Finally, in mechanism (iv), there is the stepwise multiphoton absorption of incoherent radiation from themial light sources or broad-band statistical multimode lasers. In principle, all of these processes and their combinations play a role in the multiphoton excitation of atoms and molecules, but one can broadly... 

Quack M 1998 Multi photon excitation Encyclopedia of Computational Chemistry o 3, ed P v R Schleyer et al (New York Wiley) pp 1775-91... 

Multielemental Analysis Atomic emission spectroscopy is ideally suited for multi-elemental analysis because all analytes in a sample are excited simultaneously. A scanning monochromator can be programmed to move rapidly to an analyte s desired wavelength, pausing to record its emission intensity before moving to the next analyte s wavelength. Proceeding in this fashion, it is possible to analyze three or four analytes per minute. 

Theoretical predictions must be compared to appropriate high quality experimental results. Allowed transitions (having oscillator strength greater than 0) may be compared to standard one-photon spectroscopic data. However, forbidden transitions must be compared to multi-photon experiments, and both types must be considered before a complete characterization of a system s excited states can be made. 

The relative importance of tlie different excitations may qualitatively be understood by noting tliat the doubles provide electron correlation for electron pairs, Quadruply excited determinants are important as they primarily correspond to products of double excitations. The singly excited determinants allow inclusion of multi-reference charactei in the wave function, i.e. they allow the orbitals to relax . Although the HF orbitals are optimum for the single determinant wave function, that is no longer the case when man) determinants are included. The triply excited determinants are doubly excited relative tc the singles, and can then be viewed as providing correlation for the multi-reference part of the Cl wave function. 

As indicated in Fig. 21.3, for both atomic absorption spectroscopy and atomic fluorescence spectroscopy a resonance line source is required, and the most important of these is the hollow cathode lamp which is shown diagrammatically in Fig. 21.8. For any given determination the hollow cathode lamp used has an emitting cathode of the same element as that being studied in the flame. The cathode is in the form of a cylinder, and the electrodes are enclosed in a borosilicate or quartz envelope which contains an inert gas (neon or argon) at a pressure of approximately 5 torr. The application of a high potential across the electrodes causes a discharge which creates ions of the noble gas. These ions are accelerated to the cathode and, on collision, excite the cathode element to emission. Multi-element lamps are available in which the cathodes are made from alloys, but in these lamps the resonance line intensities of individual elements are somewhat reduced. 

This approach is, at the same time, the great advantage and a major limitation of membrane potential models. As they are rather compact, models of this type were the first to be used in investigations of the spread of excitation in multi-dimensional tissue representations consisting of relatively large numbers of interconnected excitable elements their role in assessing biophysical behaviour like cardiac impulse propagation is undiminished. 

The NIR femtosecond laser microscope realized higher order multi photon excitation for aromatic compounds interferometric autocorrelation detection of the fluorescence from the microcrystals of the aromatic molecules confirmed that their excited states were produced not via stepwise multiphoton absorption but by simultaneous absorption of several photons. The microscope enabled us to obtain three-dimensional multiphoton fluorescence images with higher spatial resolution than that limited by the diffraction theory for one-photon excitation. 

---