Molecular sieves techniques

Clay filtration can be utilized to effectively remove polar compounds such as corrosion inhibitors, electrical conductivity improvers, and antioxidants from jet fuel. Also, more costly molecular sieve techniques can be utilized to remove contaminants from jet fuel. 

R28. Roskes, S. D., and Thompson, J. E., A simple molecular sieve technique for detecting macroglobulinaemia. Clin. Chim. Acta 8, 489-496 (1963). 

Gel permeation chromatography, exclusion chromatography. gel filtration chromatography. A technique for separating the components of a mixture according to molecular volume differences. A porous solid phase (a polymer, molecular sieve) is used which can physically entrap small molecules in the pores whilst large molecules pass down the column more rapidly. A solvent pressure up to 1000 psi may be used. 

The separation and analysis of 1-propanol are straightforward. Gas chromatography is the principal method employed. Other iastmmental techniques, eg, nmr, ir, and classical organic quaHtative analysis, are useful. Molecular sieves (qv) have been used to separate 1-propanol from ethanol and methanol. Commercial purification is accompHshed by distillation (qv). 

Bromo-2-methylpropane [507-19-7] M 137.0, b 71-73 , d 1.218, n 1.429. Neutralised with K2CO3, distd, and dehydrated using molecular sieves (5A), then vacuum distd and degassed by ireeze-pump-thaw technique. Sealed under vacuum. 

Mercury is emitted from the mercury cell process from ventilation systems and by-product streams. Control techniques include (1) condensation, (2) mist elimination, (3) chemical scrubbing, (4) activated carbon adsorption, and (5) molecular sieve absorption. Several mercury cell (chloralkali) plants in Japan have been converted to diaphragm cells to eliminate the poisonous levels of methyl mercury found in fish (9). 

Thermal treatments can be applied to modify the properties of a material, for example, dealumination and optimization of crystalHne phases. These techniques do not require oxidants. Oxidative thermal treatments are generally employed to activate molecular sieves, by removing the organic templates employed during synthesis. This is one of the key steps when preparing porous catalysts or adsorbents. In air-atmosphere calcination, the templates are typically combusted between 400... 

Zeolites. In heterogeneous catalysis porosity is nearly always of essential importance. In most cases porous materials are synthesized using the above de.scribed sol-gel techniques resulting in so-called amorphous catalysts. Porosity is introduced in the agglomeration process in which the sol is transformed into a gel. From X-ray Diffraction patterns it is clear that the material shows only weak broad lines, characteristic of non-crystalline materials. Silica and alumina are typical examples. Zeolites are an exception they are crystalline materials but nevertheless exhibit high (micro) porosity. Zeolites belong to the class of molecular sieves, which are porous solids with pores of molecular dimensions, i.e., typically the pore diameter ranges from 0.3 to 10 nm. Examples of molecular sieves are carbons, oxides and zeolites. 

Protein recovery via disruption has also been achieved by adsorbing water from the w/o-ME solution, which causes protein to precipitate out of solution. Methods of water removal include adsorption using silica gel [73,151], molecular sieves [152], or salt crystals [58,163], or formation of clanthrate hydrates [154]. In most of the cases reported, the released protein appeared as a solid phase that, importantly, was virtually surfactant-free. In contrast to the dilution technique, it appears that dehydration more successfully released biomolecules that are hydrophilic rather than hydrophobic. 

---