Mold filling analysis

Simple mold filling analysis to determine the ability to fill the mold cavity and to assess the pressure requirements. 

TABLE 11.3 Data Needed for Injection-Molding Simulation—Simple Mold Filling Analysis of Thermoplastics and Thermoplastic Elastomers... 

In injection molding CAE, fiber orientation analysis is carried out combining with mold filling analysis. Using velocity distributions obtained from the mold filling analysis, the fiber orientation equation is numerically solved by a finite-difference method for predicting fiber orientation. The orientation distribution function is calculated and is applied to the estimation of mechanical properties for predicting warp age of molded parts. 

Ke Twords computer aided engineering (CAE), computer simulation, fiber orientation prediction, fiber orientation modelling, fiber reinforced thermoplastics, finite difference method, finite element method (FEM), flow, glass fiber reinforcement, injection molding, mold filling analysis, warpage. 

Hence, it is desirable to drill holes after the part is molded. Otherwise, mold-ed-in holes should be located in zones of low stress. A key parameter to knit line formation is the precharge location. If possible, multiple precharge or uneven precharge placements should be avoided. Mold filling analysis before manufacturing may be useful to design the precharge specification. 

The modeling of resin curing is one of the most important issues in the analysis of compression molding because the cure cycle constitutes a major portion of the total process cycle time and an incompletely cured part should be discarded. Material flovy in mold filling is also an important topic because knit line formation can be avoided by optimizing the precharge location. Moreover, mold filling analysis is indispensable to predict the fiber... 

Once the relative velocity u) is known, we can obtain the fiber migration velocity (Wfiber) because the resin velocity ( resin) is computed from the mold filling analysis. Then, we can obtain the distribution of fiber volume fraction by solving the conservation equation of fiber content. 

Sun, X., Shoujie, L. and Lee, L. J., 1998. Mold filling analysis in vacuum assisted resin transfer molding. Part 1 SCRIMP based on a high-permeable medium , Polymer Composites, 19, 807-817. 

Mold fill analysis programs are yet another group of interactive programs that share the existing 3-D wireframe data base. Mold fill programs use both heat transfer and fluid flow programs to analyze the... 

Mold fill analysis programs affect both productivity and quality. The cycle time usually can be reduced and the part is of a higher quality due to minimum molded-in stresses. Lower molded-in stresses usually... 

Fig. 10-17. Pressure drops through a melt flow are visualized through isobars of equal pressure in mold fill analysis. Courtesy GE CAE International.)...

C-Flow Injection Mold Filling Analysis Hardware. Ithaca, NY Advanced CAE Technology, 1987. 

SpirexMoldFill A comprehensive, time-saving assistance tool for molders from Spirex with the added advantage of a mold filling analysis program built-in. 

Carbon nanofiber, SCRIMP, unsaturated polyester, mold filling analysis, hybrid conposites... 

---