Modified Electrode Types

Modified electrodes can be classified by the film-substrate attachment method (e.g., physisorption, chemisorption, and covalent attachment) and film composition (e.g., clays. 

---

The reductive cleavage of the alkylcobalamine is facilitated by light irradiation and can then proceed at a much more positive potential. A demonstration photoelec-trochemical reactor for the Bij-catalyzed photoelectrochemical synthesis of Michael adduct 17, the alarm pheromone of the ant atta texana (Scheme 9) has been constructed where the complete device is driven solely by solar energy . Hopefully, mediated photoelectrochemical reactions of this type will also be realized at chemically modified electrodes. 

The first CNT-modified electrode was reported by Britto et al. in 1996 to study the oxidation of dopamine [16]. The CNT-composite electrode was constructed with bro-moform as the binder. The cyclic voltammetry showed a high degree of reversibility in the redox reaction of dopamine (see Fig. 15.3). Valentini and Rubianes have reported another type of CNT paste electrode by mixing CNTs with mineral oil. This kind of electrode shows excellent electrocatalytic activity toward many materials such as dopamine, ascorbic acid, uric acid, 3,4-dihydroxyphenylacetic acid [39], hydrogen peroxide, and NADH [7], Wang and Musameh have fabricated the CNT/Teflon composite electrodes with attractive electrochemical performance, based on the dispersion of CNTs within a Teflon binder. It has been demonstrated that the electrocatalytic properties of CNTs are not impaired by their association with the Teflon binder [15]. 

Vertically aligned CNT-modified electrodes are based on a more elaborated technique than other methods, and microscopic images are used to characterize the integrity of this type of electrode. The technique has been applied for the immobilization of enzymes and DNA, and the sensors based on this technique have shown a lower detection limit than those based on other methods. More research activities using this technique, particularly with low density CNT arrays, are expected in the near future because of its sensitivity and versatility. 

It was pointed ouF that while ionomer-modified electrodes have greater selectivity than naked electrodes, ionomers provide only a general form of selectivity (charge type and mass or hydrophobicity selectivity), and special methods were suggested to improve specific selectivity. For example, it was thought that applying an additional cellulose acetate layer over the Nafion film would make the electrode selective with respect to dopamine specifically (in contrast to other neurotransmitters). To make the electrode system specifically selective to o-nitrophenol (in contrast to /(-isomer), a complexation with cyclodextrin was performed, which increased the selectivity ratio one order of magnitude with respect to the o-isomer. ... 

Supported electrodes. The mixture of catalyst and charcoal is poured into the space between two mechanically rigid walls, with asbestos paper as support and a graphite felt or metal sheet as current collector. No binder is necessary. With such electrodes, both liquid and gaseous working materials can be studied. For the experiments with dissolved fuels described in Section 4.2, we used modified electrodes of this type 6 mg chelate was mixed with 6 mg soot and poured between two graphite felt discs. 

---