Microstructured single-injection

As a result of the injection process, humped peaks formed by the dispersion process alone can be observed in a single-line FIA system under conditions of laminar flow provided that the reduced time t = Dm//(0.5rf) is close to 0.04, where Dm is the diffusion coefficient (cm /s), d is the diameter of the tube, and t is the time. This observation for FIA was first described by Vanderslice et al. [142], who also recently computed and depicted in an elegant way the microstructure of flow boluses under lam-... 

Haber, J., Kashid, M.N, Renken, A., and Kiwi-Minsker, L. (2011) Heat management in single and multi-injection microstructured reactors scaling effects, stability analysis, and role of mixing. Ind. 

A recent review of block copolymer patterns provides an interesting view of the use of these special polymers for nanostructure fabrication [312]. As expected, processing of blends is critical to the microstructure and properties. Typical processing involves melt mixing using single and twin screw extruders, and then the blends are extruded, injection molded, or blow molded by similar methods used for engineering resins. 

---