Microscope objectives infinity corrected

FT-IR spectrometers specifically manufactured for reflection microspectrometry are commercially available. Such spectrometers can be combined with most microscopes having infinity-corrected optics (in which the output from the Cassegrain objective mirror becomes parallel radiation). Since, in the infinity-corrected design, the output... 

It is advantageous if the microscope objective is designed to work with collimated beams. Such objectives are called infinity corrected . 

Advanced microscopes made since 1980 have a more complicated optical arrangement called infinity-corrected optics. The objective lens of these microscopes generates parallel beams from a point on the object. A tube lens is added between the objective and eyepiece to focus the parallel beams to form an image on a plane, which is further viewed and enlarged by the eyepiece. 

The manufacturers of infrared microscopes are split almost evenly between those that produce infinity-corrected and those producing non-infinity-corrected microscopes. Infinity correction effectively refers to a coUimation of the beam throughout the microscope (other than at the condenser and objective outputs), and is frequently used in research-grade optical microscopes. Despite the added... 

Figure 1.17 (a) Visual image of a 1 im-diameter polystyrene bead. The lower images show Raman images of the bead, recorded with a lOOx (NA = 0.95) infinity-corrected microscope objective at increments of (left to right) 1.0, 0.5 and 0.1 pm per step, respectively (b) Raman spectrum measured from the center of one of these beads. Reproduced with permission from Ref [41]. 

Every microscope is characterized by its numerical aperture NA, which describes the angle between the optical axis and the most remote point of the sample which can be observed. NA is directly proportional to the energy throughput. Objectives with infinity correction provide advantages such as sharper images and better sig-nal-to-noise ratio. Infinity corrected objectives are increasingly used, especially in microscopic imaging with array detectors. 

The/number for the most common infinity-corrected microscope objective lens is given by... 

Shortpass dichroic mirror, custom piece (e.g. 488DSCX, Chroma Technology Corp., USA) Microscope objective X100,1.45 NA infinity corrected oil immersion (Plan Fluar, Zeiss, Germany)... 

OBJ Microscope objective XI00,1.45 NA infinity corrected oil immersion (Plan Fluar,... 

A simple, infinity-corrected optical microscope with an electronic detector is shown schematically in Fig. 1. The parallel rays in this type of microscope make it easy to insert additional optical elements into the beam path and are now used in most Raman microscopes. The object is placed in the focal plane of the microscope objective and the magnified image is formed on a detector placed in the focal plane of the tube lens the resulting... 

Figure 1 Schematic diagram of an optical microscope with an infinity-corrected microscope objective of focal length /o and a back aperture diameter D. The tube lens of focal length / focuses the light on an electronic detector such as a CCD.

---