Lewis acids Michael addition

The highly efficient Michael addition of acid sensitive substrates such as pyrrole and indoles to stmcturally diverse electron-deficient olefins in aqueous media at room temperature using aluminium dodecyl sulfate trihydrate, [A1(DS)3]-3H20, as a new Lewis acid surfactant catalyst affords 2-substituted pyrroles 442-445 (Scheme 95) and... 

Advantages of this method are that it does not require the preparation of a mixed Zn/Cu derivative. In addition, Lewis acids are not required as catalysts. The authors did not observe any Michael addition products from a,p-unsaturated... 

A similar approach is followed in a recent study of the Lewis-acid catalysis of a Michael addition in acetonitrile. See Fukuzumi, S. Okamoto, T. Yasui, K Suenobu, T. Itoh, S. Otera, J. Chem. Lett. 1997, 667. 

The powerful nucleophilicity of enaimnes illows the dclthcion of rutro ilkenes to take place without the presence of Lewis acids The isolanon of secondary products, which can be explained by an initial Michael addition, suggests the participation of zwitlerionic intermediates m the mechanism of the reaction fEq 8 97i... 

Similar additions may be performed with the enamine 13. However, with 3-buten-2-one or methyl 2-propenoate Lewis acid catalysis is needed to activate the Michael acceptor chloro-trimethylsilane proved to be best suited for this purpose. A remarkable solvent effect is seen in these reactions. A change from THF to HMPA/toluene (1 1) results in a reversal of the absolute configuration of the product 14, presumably due to a ligand effect of HMPA235. 

For example, using (/ )-5-trimethylsilyl-2-cyclohexenone as the chiral Michael acceptor, optically active m // .v-3.5-disubstituied cyclohexanones 1 are obtained via a Lewis acid catalyzed addition of silylenol ethers or ketene acetals. 

A general approach to the synthesis of enantiomerically pure y, as weU as y " -amino acids has been developped by Brenner and Seebach [206, 207, 230]. It involves the Michael addition of Ti-enolates generated from acyl-oxazohdin-2-ones to nitroolefms in the presence of a Lewis acid (TiCU, Et2AlCl) as the key step... 

The optically active a-sulfinyl vinylphosphonate 122 prepared in two different ways (Scheme 38) is an interesting reagent for asymmetric synthesis [80]. This substrate is an asymmetric dienophile and Michael acceptor [80a]. In the Diels-Alder reaction with cyclopentadiene leading to 123, the endo/exo selectivity and the asymmetry induced by the sulfinyl group have been examined in various experimental conditions. The influence of Lewis acid catalysts (which also increase the dienophilic reactivity) appears to be important. The 1,4-addition of ethanethiol gives 124 with a moderate diastereoselectivity. 

Ferrocen-l,l -diylbismetallacycles are conceptually attractive for the development of bimetal-catalyzed processes for one particular reason the distance between the reactive centers in a coordinated electrophile and a coordinated nucleophile is self-adjustable for specific tasks, because the activation energy for Cp ligand rotation is very low. In 2008, Peters and Jautze reported the application of the bis-palladacycle complex 56a to the enantioselective conjugate addition of a-cyanoacetates to enones (Fig. 31) [74—76] based on the idea that a soft bimetallic complex capable of simultaneously activating both Michael donor and acceptor would not only lead to superior catalytic activity, but also to an enhanced level of stereocontrol due to a highly organized transition state [77]. An a-cyanoacetate should be activated by enolization promoted by coordination of the nitrile moiety to one Pd(II)-center, while the enone should be activated as an electrophile by coordination of the olefinic double bond to the carbophilic Lewis acid [78],... 

Conditions for effecting conjugate addition of neutral enolate equivalents such as silyl enol ethers in the presence of Lewis acids have been developed and are called Mukaiyama-Michael reactions. Trimethylsilyl enol ethers can be caused to react with electrophilic alkenes by use of TiCl4. These reactions proceed rapidly even at -78° C.308... 

Nitroalkenes are also reactive Michael acceptors under Lewis acid-catalyzed conditions. Titanium tetrachloride or stannic tetrachloride can induce addition of silyl enol ethers. The initial adduct is trapped in a cyclic form by trimethylsilylation.316 Hydrolysis of this intermediate regenerates the carbonyl group and also converts the ad-nitro group to a carbonyl.317... 

The Michael addition products 28-a and 28-b can be reketalized under Lewis acidic conditions to form 29-a and 29-b which presumably further eliminate methanol to aromatize to form the target 30. 

Modest diastereoselectivity was observed for the Michael addition reaction of rac-14 to 13 and these diasteromers 28-a/28-b could be separated and individually identified. The minor isomer 28-b was found to readily undergo conversion to benzoxathiin 30 when treated with BF3 etherate, presumably through the transient intermediate 29-b. The major isomer 28-a was converted by BF3 etherate to intermediate 29-a. Conversion to 30 required the use of the stronger Lewis acid TMSOTf, presumably due to the cis-stereochemistry between the methoxy and the neighboring hydrogen, making it more difficult to eliminate/aromatize. 

Jenner investigated the kinetic pressure effect on some specific Michael and Henry reactions and found that the observed activation volumes of the Michael reaction between nitromethane and methyl vinyl ketone are largely dependent on the magnitude of the electrostriction effect, which is highest in the lanthanide-catalyzed reaction and lowest in the base-catalyzed version. In the latter case, the reverse reaction is insensitive to pressure.52 Recently, Kobayashi and co-workers reported a highly efficient Lewis-acid-catalyzed asymmetric Michael addition in water.53 A variety of unsaturated carbonyl derivatives gave selective Michael additions with a-nitrocycloalkanones in water, at room temperature without any added catalyst or in a very dilute aqueous solution of potassium carbonate (Eq. 10.24).54... 

This finding is also in agreement with another three-component Michael/aldol addition reaction reported by Shibasaki and coworkers [14]. Here, as a catalyst the chiral AlLibis[(S)-binaphthoxide] complex (ALB) (2-37) was used. Such hetero-bimetallic compounds show both Bronsted basicity and Lewis acidity, and can catalyze aldol [15] and Michael/aldol [14, 16] processes. Reaction of cyclopentenone 2-29b, aldehyde 2-35, and dibenzyl methylmalonate (2-36) at r.t. in the presence of 5 mol% of 2-37 led to 3-hydroxy ketones 2-38 as a mixture of diastereomers in 84% yield. Transformation of 2-38 by a mesylation/elimination sequence afforded 2-39 with 92 % ee recrystallization gave enantiopure 2-39, which was used in the synthesis of ll-deoxy-PGFla (2-40) (Scheme 2.8). The transition states 2-41 and 2-42 illustrate the stereochemical result (Scheme 2.9). The coordination of the enone to the aluminum not only results in its activation, but also fixes its position for the Michael addition, as demonstrated in TS-2-41. It is of importance that the following aldol reaction of 2-42 is faster than a protonation of the enolate moiety. 

Heterobimetallic asymmetric complexes contain both Bronsted basic and Lewis acidic functionalities. These complexes have been developed by Shibasaki and coworkers and have proved to be highly efficient catalysts for many types of asymmetric reactions, including catalytic asymmetric nitro-aldol reaction (see Section 3.3) and Michael reaction. They have reported that the multifunctional catalyst (f )-LPB [LaK3tris(f )-binaphthoxide] controls the Michael addition of nitromethane to chalcones with >95% ee (Eq. 4.140).205... 

Furthermore, a neighboring group participation of a phenylthio function is observed in the Lewis acid-catalyzed nucleophilic substitution reaction of various P-nitrosulfides. Because the P-nitrosulfides are readily available, by the Michael addition of thiols to nitroalkenes (see Michael addition Chapter 4), this reaction is very useful. The P-nitrosulfides are prepared stereoselectively, and the reaction proceeds in a stereo-specific way (retention of configuration) as shown in Eqs. 31-34.35... 

The use of oxygen-containing dienophiles such as enol ethers, silyl enol ethers, or ketene acetals has received considerable attention. Yoshikoshi and coworkers have developed the simple addition of silyl enol ethers to nitroalkenes. Many Lewis acids are effective in promoting the reaction, and the products are converted into 1,4-dicarbonyl compounds after hydrolysis of the adducts (see Section 4.1.3 Michael addition).156 The trimethylsilyl enol ether of cyclohexanone reacts with nitrostyrenes in the presence of titanium dichloride diisopropoxide [Ti(Oi-Pr)2Cl2], as shown in Eq. 8.99.157 Endo approach (with respect to the carbocyclic ring) is favored in the presence of Ti(Oi-Pr)2Cl2. Titanium tetrachloride affords the nitronates nonselectively. 

The controlled polymerization of (meth)acrylates was achieved by anionic polymerization. However, special bulky initiators and very low temperatures (- 78 °C) must be employed in order to avoid side reactions. An alternative procedure for achieving the same results by conducting the polymerization at room temperature was proposed by Webster and Sogah [84], The technique, called group transfer polymerization, involves a catalyzed silicon-mediated sequential Michael addition of a, /f-unsaluralcd esters using silyl ketene acetals as initiators. Nucleophilic (anionic) or Lewis acid catalysts are necessary for the polymerization. Nucleophilic catalysts activate the initiator and are usually employed for the polymerization of methacrylates, whereas Lewis acids activate the monomer and are more suitable for the polymerization of acrylates [85,86]. 

Annual Volume 71 contains 30 checked and edited experimental procedures that illustrate important new synthetic methods or describe the preparation of particularly useful chemicals. This compilation begins with procedures exemplifying three important methods for preparing enantiomerically pure substances by asymmetric catalysis. The preparation of (R)-(-)-METHYL 3-HYDROXYBUTANOATE details the convenient preparation of a BINAP-ruthenium catalyst that is broadly useful for the asymmetric reduction of p-ketoesters. Catalysis of the carbonyl ene reaction by a chiral Lewis acid, in this case a binapthol-derived titanium catalyst, is illustrated in the preparation of METHYL (2R)-2-HYDROXY-4-PHENYL-4-PENTENOATE. The enantiomerically pure diamines, (1 R,2R)-(+)- AND (1S,2S)-(-)-1,2-DIPHENYL-1,2-ETHYLENEDIAMINE, are useful for a variety of asymmetric transformations hydrogenations, Michael additions, osmylations, epoxidations, allylations, aldol condensations and Diels-Alder reactions. Promotion of the Diels-Alder reaction with a diaminoalane derived from the (S,S)-diamine is demonstrated in the synthesis of (1S,endo)-3-(BICYCLO[2.2.1]HEPT-5-EN-2-YLCARBONYL)-2-OXAZOLIDINONE. 

It has been shown that Lewis acid catalyzed isomerization of thionolactones provides access to thiolactones. For example, exposure of the substrate 22 to catalytic amounts of BF3 OEt2 led to efficient conversion to the thiolactone 23. Such transformations were also found to give minor amounts of lactone or dithiolactone side products <06TL6067>. Substituted tetrahydrothiophene derivatives have also been obtained from 1,4-dithiane-2,5-diol and 2-nitroethyl acetate derivatives by a base induced sequence featuring a Michael addition and a Henry reaction <06TL8087>. 

Nitroolefins are good Michael acceptors and their reactivity toward diethylzinc is different depending on the presence or absence of Lewis acids. Since the nitro group can be further transformed to a variety of useful containing functionalities,76,7641 the asymmetric 1,4-additions of nitroolefins may provide an easily accessible pathway to highly versatile optically active synthons. 

Silylketene acetals and enolsilanes can also undergo conjugate addition to a,/ -unsaturated carbonyl derivatives. This reaction is referred to as the Mukaiyama-Michael addition and can also be used as a mild and versatile method for C-C bond formation. As shown in Scheme 8-34, in the presence of C2-symmetric Cu(II) Lewis acid 94, asymmetric conjugate addition proceeds readily, giving product with high yield and enantioselectivity.75... 

The utilization of copper complexes (47) based on bisisoxazolines allows various silyl enol ethers to be added to aldehydes and ketones which possess an adjacent heteroatom e.g. pyruvate esters. An example is shown is Scheme 43[126]. C2-Symmetric Cu(II) complexes have also been used as chiral Lewis acids for the catalysis of enantioselective Michael additions of silylketene acetals to alkylidene malonates[127]. 

This chapter will begin with a discussion of the role of chiral copper(I) and (II) complexes in group-transfer processes with an emphasis on alkene cyclo-propanation and aziridination. This discussion will be followed by a survey of enantioselective variants of the Kharasch-Sosnovsky reaction, an allylic oxidation process. Section II will review the extensive efforts that have been directed toward the development of enantioselective, Cu(I) catalyzed conjugate addition reactions and related processes. The discussion will finish with a survey of the recent advances that have been achieved by the use of cationic, chiral Cu(II) complexes as chiral Lewis acids for the catalysis of cycloaddition, aldol, Michael, and ene reactions. 

The regioselectivity of Michael additions of thiolates to 2,4-dienones can be altered drastically by variation of the reaction conditions and addition of Lewis acids to the reaction mixture. Lawton and coworkers examined the reaction of 2-mercaptoethanol with l-(3-nitrophenyl)-2,4-pentadien-l-one and observed a high regioselectivity in favor of the 1,6-addition product at 45 °C (equation 42)123,124. Lowering of the reaction temperature caused an increase in the amount of 1,4-adduct, and at —40°C, a product ratio of 40 60 was found. These events suggest that kinetic control favors the 1,4-addition product whereas the 1,6-adduct is thermodynamically more stable. If, however, the reaction was carried out with a complex of the dienone and titanium tetrachloride, only the 1,4-adduct was isolated after hydrolytic workup123. Obviously, this product is trapped as a metal chelate which prevents formation of the 1,6-adduct by retro-Michael/Michael addition. In the absence of the chelating Lewis acid, the 1,4-addition product can indeed be converted... 

---