1- Methyl-3-nitrobenzene, synthesis

Another example for the application of the methodology in the chemistry of nitroarenes is the synthesis of fluorine-containing indoles. It has been shown that substitution of hydrogen H-6 in 3-fluoro-4-/ -substituted nitrobenzenes by the action of vicarious chloromethyl phenyl sulfone proceeds selectively in DMSO in the presence of KOH at room temperature to give 4-/ -3-fluoro-6-(phenylsulfonyl-methyl)nitrobenzenes in 60-70% yields (Scheme 23) [101]. 

Halothiophenes, which are not activated through the presence of —I—M-substituents, undergo substitution smoothly under more forcing conditions with copper salts in pyridine or quinoline. Hence 3-cyanothiophene and 5-methyl-2-cyanothiophene have been obtained from the corresponding bromo compounds. 2-Bromothiophene reacts readily with aliphatic cuprous mercaptides in quinoline at 200°C to give thioethers in high yields. The use of the copper-catalyzed Williamson synthesis of alkoxythiophenes from iodo- or bromo-thiophenes and alcoholate has been mentioned before. The reaction of 2-bromothiophene with acetanilide in nitrobenzene in... 

Acid- and base-promoted methods have also been used in the syntheses of pyrazoles. Hydrogenation of methyl 2-Cbz(hydrazine)-3-hydroxy-4,4-dimethoxybutanoate 11 followed by cyclization in the presence of trifluoroacetic acid afforded the first asymmetric synthesis of the (4S,5.R)-5-carbomethoxy-4-hydroxy-A2-pyrazoline 12 <00TL8795>. Reaction of 2-nitrobenzyl triphenylphosphonium ylide (13) with aiyl isocyanates afforded 2-aryl-2H-indazoles 14 <00TL9893>. Base-promoted reaction of nitrobenzenes 15 with aryl imines 16 afforded aryl pyrazoles 17 . 

Synthesis of racemic naproxene Friedel-Crafts acylation (aluminum chloride - nitrobenzene) of p-naphthol methyl ether affords 2-acetyl-6-methoxy naphthalene, which, when treated with either dimethyl sulfonium or dimethylsulfoxonium methylide, gives 2-(6-methoxynaphthalen-2-yl)propylene oxide. Treatment of the latter with boron trifluoride etherate in tetrahydrofuran gives 2-(6-methoxynaphthalen-2-yl)propionaldehyde, which is oxidized using Jones reagent (4 M chromic acid) to yield the racemic 2-(6-methoxynaphthalen-2-yl)propionic acid. 

In the stepwise synthesis of the unsymmetrical complex dye 13 [ 70236-60-1] [10], the azo dye made from diazotized l-amino-2-hydroxy-5-nitrobenzene and 1-phenyl-3-methyl-5-pyrazolone and the 1 1 chromium complex obtained from 6-nitro-l-diazo-2-hydroxynaphthalene-4-sulfonic acid and 2-naphthol are heated together at 80 °C for 5 h. The adduct is salted out with NaCl. A black powder is obtained that dyes wool and leather in dark brown shades. The resulting colors are fast, particularly on shrink-resistant wool. 

Nitro-2-cyanomethylbenzimidazole, an intermediate in the synthesis of cyanine dyes, was prepared from l,2-diamine-4-nitrobenzene and methyl cyanoac-etate in nitrobenzene (Scheme 2.42) [369],... 

Tseng and colleagues [58] reported a three-step synthesis of fused tetrahydro-P-carbolinequinoxalinones, solely based on the use of ionic liquids as solvents. Tetrahydro-P-carboline is a central core for many biologically important indole alkaloids, and the moiety of quinoxalinone often exhibits a wide spectrum of biological activities such as being anti-HIV, antihypertensive, and a ligand for a number of protein receptors. As a first step, tryptophan methyl ester was reacted with an aldehyde to form tetrahydro-p-carboline by Pictet-Spengler cyclization that further reacted with l-fluoro-2-nitrobenzene to form iV-aryl-tetrahydro-P-carboline. Intramolecular cyclization upon a reduction reaction in step three provided the desired tetrahydro-P-carbolinequinoxalinones. The entire process was based on the use of 1-n-butyl-... 

Desulfurization of petroleum feedstock (FBR), catalytic cracking (MBR or FI BR), hydrodewaxing (FBR), steam reforming of methane or naphtha (FBR), water-gas shift (CO conversion) reaction (FBR-A), ammonia synthesis (FBR-A), methanol from synthesis gas (FBR), oxidation of sulfur dioxide (FBR-A), isomerization of xylenes (FBR-A), catalytic reforming of naphtha (FBR-A), reduction of nitrobenzene to aniline (FBR), butadiene from n-butanes (FBR-A), ethylbenzene by alkylation of benzene (FBR), dehydrogenation of ethylbenzene to styrene (FBR), methyl ethyl ketone from sec-butyl alcohol (by dehydrogenation) (FBR), formaldehyde from methanol (FBR), disproportionation of toluene (FBR-A), dehydration of ethanol (FBR-A), dimethylaniline from aniline and methanol (FBR), vinyl chloride from acetone (FBR), vinyl acetate from acetylene and acetic acid (FBR), phosgene from carbon monoxide (FBR), dichloroethane by oxichlorination of ethylene (FBR), oxidation of ethylene to ethylene oxide (FBR), oxidation of benzene to maleic anhydride (FBR), oxidation of toluene to benzaldehyde (FBR), phthalic anhydride from o-xylene (FBR), furane from butadiene (FBR), acrylonitrile by ammoxidation of propylene (FI BR)... 

Wellinghoff et al. [215] reported synthesis of nitrobenzene soluble poly(N-methyl-3,3 -carbazole) on doping with iodine in the ratio of one iodine per carbazole monomer unit. The presence of I3 and 15 counter-ions in the doped polymer were confirmed by Raman spectroscopy. The black shiny material showed an electrical conductivity in the range of 1-lOohm cm" and long term stability in air at room temperature for many months as shown in Figure 16.41. 

The electrochemical reduction of nitrobenzene is believed to be operating commercially in India where aniline is the required product, and in Japan where 4-aminophenol is the desired product.The latter process relies on the in situ rearrangement of phenylhydroxylamine, the conditions of electrolysis being selected to maximize the production of this intermediate in the process. Also at BASF it is believed that a pilot plant synthesis of 4-anisidine from nitrobenzene is being operated. This process relies not only on in situ rearrangement of phenylhydroxylamine but also on in situ methylation of... 

This reaction was initially reported by Doebner and von Miller in 1881 as a modification of the original Skraup Reaction, and it was subsequently modified by Beyer in 1886 It is an acidic condensation between primary aromatic amines (e.g., anilines) and Q ,j8-unsaturated carbonyl compounds (mostly o ,y3-unsaturated aldehydes) to give 2,3-disubstituted quinolines. Therefore, this reaction is generally known as the Doebner-Miller reaction, or Doebner-Miller synthesis." In addition, this reaction is also referred to as the Doebner-von Miller quinoline synthesis, Skraup-Doebner-von Miller reaction, Skraup-Doebner-von Miller quinoline synthesis, Doebner-Miller condensation, and Doebner-Miller Quinaldine Synthesis. For comparison, the modification from Beyer, known as the Beyer method for quinoline, is an acidic condensation between anilines and Q ,j8-unsaturated carbonyl compounds generated in situ from aldehyde or aldehyde and methyl ketone to afford 2,4-disubstituted quinolines." The optimal condition of this reaction is to heat the mixture of aniline/aldehyde (1 2) at 100°C for 6 h with hydrochloric acid and zinc chloride in addition, an oxidizing reagent is also needed in this reaction, such as nitrobenzene. However, it has been reported that A -alkylanilines are also formed in this reaction. The nature and... 

The synthesis had a series of disadvantages, like a poor regioselectivity in the Friedel-Crafts acylation, in which the 1-isomer is also produced, accompanied by educts and by-products with safety-critical properties (nitrobenzene, sodium hydride, methyl iodide, sulfide salts) and an undesirable waste disposal problem, demanding a different synthetic path for the larger production scale. 

---