Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Mass blowing number

No. Polymers Blowing agent concentration, % mass Number of experiments on various channels and various volum. flow rates Pcr (bar) in accordance with Eq. (5) APexp (mean) bar APcalcd Eq (15), bar AP AP 0/ calc exp tnri... [Pg.112]

It will have been noted that in the experimentation which lias been described up to this point the use of platinum and copper as suitable catalysts for promoting the oxidation of alcohols has been emphasized by a large number of investigators. In characterizing the use of platinum in general, it may be said that this metal has been employed for the most part in the form of a finely divided precipitate which is supported on a variety of different carriers such as asbestos, pumice, etc.10 The porous carrier may be prepared from liquid paste or materials which wholly or partially melt in their water of crystallization. After the addition of platinum chloride the mass is usually dried by blowing a gas through it, which operation may be carried on in the catalytic apparatus itself.17... [Pg.75]

In the period 1775-1780, Lavoisier established chemistry as a quantitative science by proving that in the course of a chemical reaction the total mass is unaltered. The conservation of mass in chemical reactions proved ultimately to be a death blow to the phlogiston theory. Shortly after Lavoisier, Proust and Dalton proposed the laws of definite and multiple proportions. In 1803 Dalton proposed his atomic theory. Matter was made up of very small particles called atoms. Ever kind of atom has a definite weight. The atoms of different elements have different weights. Compounds are formed by atoms which combine in definite ratios of (usually small) whole numbers. This theory could give a satisfying interpretation of the quantitative data available at the time. [Pg.445]

The solution is evaporated to about 4.5 1. either by gentle boiling or by blowing a stream of air over the surface of the heated solution. The solution is allowed to cool about one-sixth of the mass should crystallize. The liquor is poured from the crystals into another dish and is again evaporated. To the crystals is added about 200 ml. of water and the dish heated until these crystals are dissolved. The resulting solution is poured into a 2-1. pyrex Florence flask and the dish rinsed into the same container this flask is labeled fraction 1. From the remaining rare earth solution are then removed further fractions in the same way, and each is transferred to a 2-1. flask and labeled in sequence 2, 3, etc. The final liquor, which will have a volume of about 200 ml., forms the fraction with the highest number. The series will now consist of fractions 1 to 7 aU should be nearly the same size except the last. [Pg.53]

The test consists of the measurement of the penetration depth of a standard cone, with a mass of 80 g, forced into the soil material. By carrying out measurements at different moisture contents, a diagram similar to the number of blows versus moisture content is obtained. The liquid limit is determined as the moisture content at which the penetration depth is equal to 20 mm. [Pg.12]


See other pages where Mass blowing number is mentioned: [Pg.102]    [Pg.111]    [Pg.677]    [Pg.194]    [Pg.93]    [Pg.259]    [Pg.829]    [Pg.70]    [Pg.246]    [Pg.643]    [Pg.259]    [Pg.37]    [Pg.447]    [Pg.408]    [Pg.843]    [Pg.212]    [Pg.732]    [Pg.101]    [Pg.120]    [Pg.647]    [Pg.247]    [Pg.59]    [Pg.55]    [Pg.170]    [Pg.413]    [Pg.74]    [Pg.564]   
See also in sourсe #XX -- [ Pg.599 , Pg.793 ]




SEARCH



Blowing

Mass number

© 2024 chempedia.info