Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Mandrel bending test

Fig. 4. Flexibility of poly(HAMCL) alkyd paints, visualized by conical mandrel bending test... Fig. 4. Flexibility of poly(HAMCL) alkyd paints, visualized by conical mandrel bending test...
ASTM D522 and BS 3900 El Cylindrical mandrel bend test. [Pg.234]

ASTM D3111-99 Standard practice for flexibility determination of hot melt adhesives by mandrel bend test method. [Pg.281]

Flexural Strength of Adhesive Bonded Laminated Assemblies, Test for (D 1184) Flexibility Determination of Hot Melt Adhesives by Mandrel Bend Test Method, Practice for (D 3111)... [Pg.787]

D 522-92 Test Methods for Mandrel Bend Test of Attached Organic Coatings... [Pg.635]

Flexibility Determination of Hot Melt Adhesives by Mandrel Bend Test... [Pg.419]

Cure varies with needle size and hub configuration. Similar product Eccobond 933-39. Mandrel bend test at -30 C ASTM D-4338 No cracks in adhesive or separation from substrate. ... [Pg.196]

ASTM D 4338-90 Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend Test Method. [Pg.380]

This is the area where plastic plays a tremendous role in determining painted part performance. The closer the match in flexibility of the plastic part with that of the coating used, the better the probabUity of meeting the expected low-temperature flexibility and impact performance. For many years, the flexibility of a painted part was accessed through a mandrel bend test. More recently, the importance of this test has diminished and has been replaced with the multiaxial impact test, usually performed at low temperatures. Failure in this test occurs... [Pg.185]

See other pages where Mandrel bending test is mentioned: [Pg.205]    [Pg.205]    [Pg.205]    [Pg.205]    [Pg.225]    [Pg.515]    [Pg.181]    [Pg.250]    [Pg.197]   
See also in sourсe #XX -- [ Pg.205 ]



SEARCH



Bending testing

Mandrel bend test

Mandrell

© 2024 chempedia.info