Lithium ester reduction with

Blumenfeld and Gallop (1962b) have used lithium borohydride reduction, with subsequent chromatographic separation of the amino alcohols produced, to identify the carboxyl donor of the ester links previously found by Gallop et al. (1959) using hydroxylamine and hydrazine. The peaks obtained on the chromatogram for the two products in question, namely homoserine and /3-amino-7-hydroxybutyric acid, are very small, but nonetheless seem to establish that a- and /3-carboxyl groups of aspartic acid participate in the hydroxylamine-sensitive links. 

Reduction with sodium in alcohol was unsuccessful (54). The introduction of lithium aluminium hydride has provided an elegant method for the reduction of thiazole esters to hydroxythiazoles for example, ethyl 2-methyl-4-thiazolecarboxylate (11 with lithium aluminium hydride in diethyl ether gives 2-methyl-4-(hydroxymethyl)thiazole (12) in 66 to 69% yield (Scheme 7) (53),... 

Give the structure of an ester that will yield a mixture contain mg equimolar amounts of 1 propanol and 2 propanol on reduction with lithium aluminum hydride... 

In general, if the desired carbon—phosphoms skeleton is available in an oxidi2ed form, reduction with lithium aluminum hydride is a powerful technique for the production of primary and secondary phosphines. The method is appHcable to halophosphines, phosphonic and phosphinic acids as well as thein esters, and acid chlorides. Tertiary and secondary phosphine oxides can be reduced to the phosphines. 

An aiyl methane- or toluenesulfonate ester is stable to reduction with lithium aluminum hydride, to the acidic conditions used for nitration of an aromatic ring (HNO3/HOAC), and to the high temperatures (200-250°) of an Ullman reaction. Aiyl sulfonate esters, formed by reaction of a phenol with a sulfonyl chloride in pyridine or aqueous sodium hydroxide, are cleaved by warming in aqueous sodium hydroxide. ... 

Studies of reductions with metal hydndes have concentrated on improvements in selectivity or conditions Replacement of the usual lithium aluminum hydnde-ether combination with potassium borohydride-methanol results m high yields of alcohol from ester [76] and less hazard [77] (equation 62) Reduction of a... 

Reduction with lithium aluminum hydride (Section 15.3) Lithium aluminum hydride cleaves esters to yield two alcohols. 

Compared to the lithium enolates of l and 5, the higher stereoselectivity obtained by the Mukaiyama variation is, in general, accompanied by reduced chemical yields. The chiral alcoholic moieties of the esters 3 and 7 can be removed either by reduction with lithium aluminum hydride (after protection of the earbinol group) or by aqueous alkaline hydrolysis with lithium hydroxide to afford the corresponding carboxylic acid. In both cases, the chiral auxiliary reagent can be recovered. 

Enantiomerically pure /J-keto sulfoxides are prepared easily via condensation of a-lithiosulfinyl carbanions with esters. Reduction of the carbonyl group in such /J-keto sulfoxides leads to diastereomeric /J-hydroxysulfoxides. The major recent advance in this area has been the discovery that non-chelating hydride donors (e.g., diisobutylaluminium hydride, DIBAL) tend to form one /J-hydroxysulfoxide while chelating hydride donors [e.g., lithium aluminium hydride (LAH), or DIBAL in the presence of divalent zinc ions] tend to produce the diastereomeric /J-hydroxysulfoxide. The level of diastereoselectivity is often very high. For example, enantiomerically pure /J-ketosulfoxide 32 is reduced by LAH in diethyl ether to give mainly the (RR)-diastereomer whereas DIBAL produces exclusively the (.S R)-diastereomer (equation 30)53-69. A second example is shown in... 

In this section primarily reductions of aldehydes, ketones, and esters with sodium, lithium, and potassium in the presence of TCS 14 are discussed closely related reductions with metals such as Zn, Mg, Mn, Sm, Ti, etc., in the presence of TCS 14 are described in Section 13.2. Treatment of ethyl isobutyrate with sodium in the presence of TCS 14 in toluene affords the O-silylated Riihlmann-acyloin-condensation product 1915, which can be readily desilylated to the free acyloin 1916 [119]. Further reactions of methyl or ethyl 1,2- or 1,4-dicarboxylates are discussed elsewhere [120-122]. The same reaction with trimethylsilyl isobutyrate affords the C,0-silylated alcohol 1917, in 72% yield, which is desilylated to 1918 [123] (Scheme 12.34). Likewise, reduction of the diesters 1919 affords the cyclized O-silylated acyloin products 1920 in high yields, which give on saponification the acyloins 1921 [119]. Whereas electroreduction on a Mg-electrode in the presence of MesSiCl 14 converts esters such as ethyl cyclohexane-carboxylate via 1922 and subsequent saponification into acyloins such as 1923 [124], electroreduction of esters such as ethyl cyclohexylcarboxylate using a Mg-electrode without Me3SiCl 14 yields 1,2-ketones such as 1924 [125] (Scheme 12.34). 

Preparation of the quaternary anticholinergic agent benzilonium bromide (47) is begun by conjugate addition of ethylamine to methylacrylate, giving aminoester 42. Alkylation of 42 with methyl bromo-acetate leads to diester 43, which is transformed into pyrrolidone 44 by Dieckmann cyclization, followed by decarboxylation. Reduction of 44 by lithium aluminum hydride leads to the corresponding amino-alcohol (45). Transesterification of alcohol 45 with methyl benzilate leads to 46. Benzilonium bromide (47) is obtained by alkylation of ester 46 with ethyl bromide. 2... 

The reason why the carbonyl group in -santonin remained intact may be that, after the reduction of the less hindered double bond, the ketone was enolized by lithium amide and was thus protected from further reduction. Indeed, treatment of ethyl l-methyl-2-cyclopentanone-l-carboxylate with lithium diisopropylamide in tetrahydrofuran at — 78° enolized the ketone and prevented its reduction with lithium aluminum hydride and with diisobutyl-alane (DIBAL ). Reduction by these two reagents in tetrahydrofuran at — 78° to —40° or —78° to —20°, respectively, afforded keto alcohols from several keto esters in 46-95% yields. Ketones whose enols are unstable failed to give keto alcohols [1092]. 

Usually alcohols accompany aldehydes in reductions with lithium aluminum hydride [1104] or sodium bis 2-methoxyethoxy)aluminum hydride [544], or in hydrogenolytic cleavage of trifluoroacetylated amines [7772]. Thus terr-butyl ester of. -(. -trifluoroacetylprolyl)leucine was cleaved on treatment with sodium borohydride in ethanol to rerr-butyl ester of A7-prolylleucine (92% yield) and trifluoroethanol [7772]. During catalytic hydrogenations over copper chromite, alcohols sometimes accompany amines that are the main products [7775]. 

Bromination to 4 and substitution of the bromine by an amine gives 5. Sodium borohydride reduction of the ketone to an alcohol 6 is followed by a resolution with (-)-di-/ -toluoyltartaric acid and reduction of the ester group with lithium aluminum hydride to give diol 7. Catalytic debenzylation gives albuterol, sometimes called salbutamol. 

The other stereoselective synthesis/281 shown in Scheme 8, foresees conversion of Boc-L-Asp-OtBu 20 into the related (3-aldehyde 22 via the Weinreb amide 21 and its reduction with diisobutylaluminum hydride (DIBAL-H). Wittig condensation of 22 with the ylide derived from (3-carboxypropyl)triphenylphosphonium bromide using lithium hexamethyldisilaza-nide at —78 to 0°C, produces the unsaturated compound 23 which is catalytically hydrogenated to the protected L-a-aminosuberic acid derivative 24. Conversion of the co-carboxy group into the 9-fluorenylmethyl ester, followed by TFA treatment and reprotection of the M -amino group affords Boc-L-Asu(OFm)-OH (25). 

---