Liquid metals chemical composition

The name dust , is used in a variety of ways, and with different meanings. These range from the material that accumulates on the earth s surface, such as on streets and in living and working environments, to the particulate material suspended in the atmosphere. In this paper I wish to consider these two materials in terms of their chemical composition, sources and relationship between them. The names used for the two materials will be surface dust and atmospheric dust . The word aerosol may also be used for atmospheric dust but it more properly applies to the finer particles of atmospheric dust and includes liquid aerosol (i). Botfi surface and atmospheric dusts are increasingly seen to be a hazard to human beings as they are a source of intake of toxic materials such as heavy metals. For this reason study is important of the composition and sources of the dusts. 

There appears to be some uncertainty of the exact chemical composition of some of the metal-organic compounds considered in this section and in the following section on liquids and glasses, the prime example being the chelates formed between europium and dibenzoylmethane. Undoubtedly this difficulty will be completely rectified in the very near future. 

The basic oxygen process produces steels that contain about 1% carbon but only very small amounts of phosphorus and sulfur. Usually, the composition of the liquid steel is monitored by chemical analysis, and the amounts of oxygen and impure iron used are adjusted to achieve the desired concentrations of carbon and other impurities. The hardness, strength, and malleability of the steel depend on its chemical composition, on the rate at which the liquid steel is cooled, and on subsequent heat treatment of the solid. The mechanical and chemical properties of a steel can also be altered by adding other metals. Stainless steel, for example, is a... 

Corrosion can also occur by a direct chemical reaction of a metal with its environment such as the formation of a volatile oxide or compounds, the dissolution of metals in fused metal halides. The reaction of molybdenum with oxygen and the reaction of iron or aluminum with chlorine are typical examples of metal/gas chemical reactions. In these reactions, the metal surface stays film-free and there is no transport of electrical charge.1 Fontana and Staehle2 have stated that corrosion should include the reaction of metals, glasses, ionic solids, polymeric solids and composites with environments that embrace liquid metals, gases, aqueous and other nonaqueous solutions. 

Over the past century, techniques have been developed to fire on metal surfaces, glass and porcelain in suitable formulations and in adequate thicknesses to be a liquid-tight barrier to protect the substrate from chemical attack by contained liquids. In such composite structures, the glass is better able to withstand thermal and mild mechanical abuse. Reactors made in such a manner have given long economical service over the years, and have been manufactured in sizes larger than they could have been if made entirely from glass. 

---