Diagram lines

The power circuit single-line diagram is show n in Figure 13.50. The following are the controls and protections that may be genertilly required for such a plant. 

Table 14.4 Computation of heat losses (or temperature rise test (single-line diagram, Figure 14.1)...

Figure 14.1 Single-line diagram for an assembly under a heat run test...

Consider a system shown in the single-line diagram of Figure 23.35, where total load on MCC-1 as in the single-line diagram of Figure 23.36 is... 

Figure 23.35 Single-line diagram for an industrial load...

The line diagrams had been kept up-to-date despite the pressures on the plant staff during startup. This made it easier to repeat the relief and blowdown review. The plant staff members were so impressed by the results that they decided to have another look at the relief and blowdown after another year. 

Modifications should always be marked on a line diagram before they are approved, and the person who authorizes them should always inspect the finished modification to make sure that his or her intentions have been followed. 

Figure 15.20 Typical electrical single-line diagrams for an 8 MW power plant...

The choice of material from the viewpoint of mechanical properties must be based on design conditions. However, from a corrosion standpoint it must be realised that the design conditions are limiting values and that for most of its life the equipment will operate under process conditions . For the decision on the requisite corrosion-resistance properties it is necessary to examine, by means of an operability study, how far process conditions may deviate from the normal and how often and for how long. The operability study is carried out using a line diagram for the projected plant. 

Fig. XI, 2, 5 is a drawing of the Hilger -Abbe refractometer, whilst Fig. XI, 2,6 is a line diagram showing the essential parts of the instrument.

Fig. 12.2. Redox-pH diagram for the Fe-S-H20 system at 100 °C, showing speciation of sulfur (dashed line) and the stability fields of iron minerals (solid lines). Diagram is drawn assuming sulfur and iron species activities, respectively, of 10-3 and 10-4. Broken line at bottom of diagram is the water stability limit at 100 atm total pressure. At pH 4, there are two oxidation states (points A and B) in equilibrium with pyrite under these conditions.

Feature Conceptual stage Flowsheet stage Line diagram stage (PID)... 

For an example of the kinds of decisions that involve the time value of money, examine the advertisement in Figure 3.1. For which option do you receive the most value Answers to this and similar questions sometimes may be quickly resolved using a calculator or computer without much thought. To understand the underlying assumptions and concepts behind file calculations, however, you need to account for cash flows in and out using the investment time line diagram for a project. Look at Figure 3.2. 

Melzack and Wall theorized that the transmission of a peripheral painful stimulus to the CNS occurs via a gate at spinal cord level. This gate comprises an inhibitory interneurone in the substantia gelatinosa that may be either stimulated or inhibited by different afferent inputs. A simple line diagram can be useful when explaining the mechanism to avoid confusion. 

Electrical Preliminary specifications Distribution specifications Preliminary interlocks and controls Engineered single-line diagrams ... 

Each phase boundary is indicated by a vertical line. The electrodes are shown at the extreme left- and right-hand sides of the line diagram. The cell in Figure 14-6 is... 

When faced with a cell drawing or a line diagram, first write reduction reactions for each half-cell. To do this, look in the cell for cm element in two oxidation states. For the cell... 

---