Lime weighted averages

There have been several recent studies of the physiologic effects or chlorine. These have considered chlorine both as an occupational exposure and as an environmental pollutant (see references). The National Institute of Occupational Safely and Health study recommended ait 0.5 ppm concentration of chlorine in air for any 15-minute sampling period as (he maximum permissible ceiling value. This contrasts with the generally accepted value of I ppm TLV (lime weighted average for an eight hour exposure). 

The ACG1H threshold limit value (TLV). lime-weighted average for an 8-h workday. 40-h workweek, was set at 50 ppm l - 200 mg/nr ) with a notation for skin absorption. 

As airborne dusts, the long term exposure limits (8-hour time-weighted average) for quicklime and hydrated lime are 2 and 5mg/m of dust respectively [34.1]. The dusts are irritating to the respiratory tract and may cause inflammation. 

Chernozems (C) Other soils having a mollic A horizon with a moist chroma of 2 or less to a depth of at least IS cm having one or more of the following a calcic or a gypsic horizon, or concentrations of soft powdery lime within 125 cm of the surface when the weighted average textural class is coarse, within 90 cm for medium textures, within 75 cm for fine textures ... 

Chemical intakes are calculated using equations that include variables for e.xposure concentration, contact rate, e.xposure frequency, e.xposure duration, body weight, and exposure averaging lime. The values of some of these variables depend on site conditions and the characteristics of The potentially c.xposcd population. 

Consider a 3-fiini-diumetcr raindrop that is falling freely in atmospheric air at 25°C. Taking the temperature of the raindrop lo be 9°C, determine the terminal velocity of the raindrop at which the drag force equals the weight of the drop and the average mass iransfer coefficieni at dial lime. 

Fig. 19. Influence of shear rate B the average number of broken bonds per chain (Eq, (38)) vs. degradation lime for three different shear rates measured on polystyrene in rraas-decalin U, denotes the nonuniformity of the starting molecular weight distribution (P ,o/Pn,o — 1) and AT is the distance to the demixing temperature...

Alexander (24a) was the first to - follow the polymerization of monomer in the absence of salts. At pH 2 the number-average molecular weight increased linearly with the square root of time, as reported by Her (116). At pH 3.2 and 3.8 it increased in proportion to time. At pH 4.36 it increased linearly with the square of the lime, as... 

---