Layer high-density

The actuality of researches of multi-layer objects with high density of materials for airspace technics is substantiate by several firms. The distribution of the heavier in longerons and elements of the screw of the helicopter was determined with the help of RCT. In the filler made of graphite or rubbers the layers of heavier from leaden alloys and the air stratification 1 up to 5 mm wide are revealed with the ratio signal / noise more than 3, even at presence of an external steel cover. 

C. C. Shiflett, D. B. BuchhoF, and C. C. Faudskar, "High-Density Multilayer Hybrid Circuits Made with Polymer Insulating Layers (Polyhic s)," Society of Hybrid Microelectronics Proceedings, 1980, pp. 481—486. 

Molding. The reaction mixtuie can be discharged iato a mold to flow out and fill the cavity. High density (about 320 kg/m or 20 lbs/fT) mol dings can be used for decorative furniture items such as drawer fronts or clock frames. The formulation can be adjusted to produce articles with a nonfoam skia layer and a cellular core which are known as stmctural foams. 

Hard plating is noted for its excellent hardness, wear resistance, and low coefficient of friction. Decorative plating retains its brilliance because air exposure immediately forms a thin, invisible protective oxide film. The chromium is not appHed directiy to the surface of the base metal but rather over a nickel (see Nickel and nickel alloys) plate, which in turn is laid over a copper (qv) plate. Because the chromium plate is not free of cracks, pores, and similar imperfections, the intermediate nickel layer must provide the basic protection. Indeed, optimum performance is obtained when a controlled but high density (40—80 microcrack intersections per linear millimeter) of microcracks is achieved in the chromium lea ding to reduced local galvanic current density at the imperfections and increased cathode polarization. A duplex nickel layer containing small amounts of sulfur is generally used. In addition to... 

Now, assume that the adsorbed layer is not a homogeneous phase but exhibits two-phase eoexistenee between the low density phase (1) and the high density phase (2) and that these two phases eontain Ni and N2 mole-eules, respeetively, and oeeupy the areas A j and A2. Of eourse, the total area of the sample is + 2 the total number of adsorbed partieles is... 

It is precisely the loosening of a portion of polymer to which the authors of [47] attribute the observed decrease of viscosity when small quantities of filler are added. In their opinion, the filler particles added to the polymer melt tend to form a double shell (the inner one characterized by high density and a looser outer one) around themselves. The viscosity diminishes until so much filler is added that the entire polymer gets involved in the boundary layer. On further increase of filler content, the boundary layers on the new particles will be formed on account of the already loosened regions of the polymeric matrix. Finally, the layers on all particles become dense and the viscosity rises sharply after that the particle with adsorbed polymer will exhibit the usual hydrodynamic drag. 

---