Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Labeling, labels phosphorescent

Physical methods Physical methods include photometric absorption and fluorescence and phosphorescence inhibition, which is wrongly referred to as fluorescence quenching [1], and the detection of radioactively labelled substances by means of autoradiographic techniques, scintillation procedures or other radiometric methods. These methods are nondestructive (Chapt. 2). [Pg.6]

Several types of labels have been used in immunoassays, including radioactivity, enzymes, fluorescence, luminescence and phosphorescence. Each of these labels has advantages, but the most common label for clinical and environmental analysis is the use of enzymes and colorimetric substrates. [Pg.624]

Like the palladium(II) complexes, the platinum(II) porphyrins show appreciable phosphorescence even in aqueous media at room temperature in one study,169 singlet oxygen quantum yields ranged from 0.1 to 0.9 and were strongly influenced by dimerization/aggregation. Platinum(II) 5,10,15,20-tetrakis(/>-carboxyphenyl)porphyrin and platinum(II)coproporphyrin-I ((36) for Pd read Pt) have been studied as phosphorescent labels of antibodies for use in time-resolved microscopy.189... [Pg.977]

Fig. 25. (A) DELFIA (Dissociation Enhanced Lanthanide Fluoro-ImmunoAssay) system. This heterogeneous immunoassay system uses a primary antibody bound to a solid support, to which a variable amount of unlabeled antigen is bound. The secondary antibody is labeled with a non-phospho-rescent lanthanide chelate, which becomes phosphorescent after dissociation from the antibody, due to the addition of an enhancement solution [which typically contains a mixture of sensitizer (typically a (1-diketonate) and micelle inducing surfactant (5). (B) Heterogeneous fluoroimmunoassay using a secondary antibody directly labeled with a phosphorescent lanthanide chelate. Fig. 25. (A) DELFIA (Dissociation Enhanced Lanthanide Fluoro-ImmunoAssay) system. This heterogeneous immunoassay system uses a primary antibody bound to a solid support, to which a variable amount of unlabeled antigen is bound. The secondary antibody is labeled with a non-phospho-rescent lanthanide chelate, which becomes phosphorescent after dissociation from the antibody, due to the addition of an enhancement solution [which typically contains a mixture of sensitizer (typically a (1-diketonate) and micelle inducing surfactant (5). (B) Heterogeneous fluoroimmunoassay using a secondary antibody directly labeled with a phosphorescent lanthanide chelate.
The key advantage that lanthanide labels have over other types of fluorescent labels is that time resolved techniques can be employed, allowing fluorescence from the surrounding biological medium to dissipate before detection of the long lived lanthanide phosphorescence. The safety advantages they have over radioactive labels are clear. [Pg.417]

Membranes can be labeled with phosphorescent tape (Sigma, cat no L5149), which can be written on with a permanent black marker This produces a negative image of the writing on the film... [Pg.214]

Spin, Mossbauer, fluorescent and phosphorescent labels were introduced into the various portions of the system being studied. They were covalently bound to the RC surface groups, adsorbed by the hydrophobic segments of the protein and membrane, and 57Fe atoms were incorporated by way of biosynthesis into iron-containing proteins. Then, in the same samples, the dependence on temperature, moisture content and viscosity was measured for the label mobility and the rate constant of electron transfer... [Pg.147]

The fluorescence studies of the interaction of cytochrome c with the anilinonaphthalene sulfonate-apoenzyme and protoporphyrin-apoenzyme complexes provide another line of evidence (S9) in support of the above-mentioned conclusion. Both fluorescence steady-state and lifetime titrations of these fluorescence-labeled apoenzymes with ferro- and ferricytochrome c indicates the formation of a 1 1 complex, the afiSnity for ferricytochrome c being less than that for ferrocytochrome c. From the phosphorescence and fluorescence quenching, the distance between the emitter (a fluorescence label) and the quencher (the heme of cytochrome... [Pg.359]

Quantum Yield Efficiency of fluorescence percentage of incident energy emitted after absorption. The higher the quantum yield, the greater the intensity of the fluorescence, luminescence, or phosphorescence. See Papp, S. and Vanderkooi, J.M., Tryptophan phosphorescence at room temperature as a tool to study protein structure and dynamics, Photochem. Photobiol. 49, 775-784, 1989 Plasek, J. and Sigler, K Slow fluorescent indicators of membrane potential a survey of different approaches to probe response analysis, J. Photochem. Photobiol. 33, 101-124, 1996 Vladimirov, Y.A., Free radicals in primary photobiological processes, Membr. Cell Biol. 12, 645-663, 1998 Maeda, M., New label enzymes for bioluminescent enzyme immunoassay, J. Pharm. Biomed. Anal. 30, 1725-1734, 2003 Imahori, H., Porphyrin-fullerene linked systems as artificial photosynthetic mimics, Org. Biomol. Chem. 2, 1425-1433, 2004 Katerinopoulos, H.E., The coumarin moiety as chromophore of fluorescent ion indicators in biological systems, Curr. Pharm. Des. 10, 3835-3852, 2004. [Pg.190]

Figure 19.5 Schematic diagram showing decomposition of total phosphorescence enhancement of PtOEP on silver films into absorption enhancement E X. ) and emissive rate enhancement E (%.2) based on the photophysical model described in the text and data from steady state and transient spectroscopy of PtOEP films with various thicknesses and excitation wavelengths as labeled. The lines represent the possible combinations that could explain the experimentally observed changes in photoluminescence where each position on the line represents a different choice of fQ, the fraction of the excited states that are quenched nonradiatively by interactions between the molecule and the metallic surface. The blue shaded region on the vertical axis is the range of possibilities allowed by constraints from extinction and excitation spectra as explained in the text. The dotted oval is what we believe to be the most likely decomposition for the 6 nm films characterized in Figure 19.4 as discussed in the text. Reprinted from reference 45 with permission of the American Chemical Society. Figure 19.5 Schematic diagram showing decomposition of total phosphorescence enhancement of PtOEP on silver films into absorption enhancement E X. ) and emissive rate enhancement E (%.2) based on the photophysical model described in the text and data from steady state and transient spectroscopy of PtOEP films with various thicknesses and excitation wavelengths as labeled. The lines represent the possible combinations that could explain the experimentally observed changes in photoluminescence where each position on the line represents a different choice of fQ, the fraction of the excited states that are quenched nonradiatively by interactions between the molecule and the metallic surface. The blue shaded region on the vertical axis is the range of possibilities allowed by constraints from extinction and excitation spectra as explained in the text. The dotted oval is what we believe to be the most likely decomposition for the 6 nm films characterized in Figure 19.4 as discussed in the text. Reprinted from reference 45 with permission of the American Chemical Society.
A review of chemiluminescent and bioluminescent methods in analytical chemistry has been given by Kricka and Thorpe. A two-phase flow cell for chemiluminescence and bioluminescencc has been designed by Mullin and Seitz. The chemiluminescence mechanisms of cyclic hydrazides, such as luminol, have been extensively analysed. " Fluorescence quantum yields of some phenyl and phenylethynyl aromatic compounds in peroxylate systems have been determined in benzene. Excited triplet states from dismutation of geminate alkoxyl radical pairs are involved in chemiluminescence from hyponitrite esters. Ruorophor-labelled compounds can be determined by a method based on peroxyoxalate-induced chemiluminescence. Fluorescence and phosphorescence spectra of firefly have been used to identify the multiplicity of the emitting species. " The chemiluminescence and e.s.r. of plasma-irradiated saccharides and the relationship between lyoluminescence and radical reaction rate constants have also been investigated. Electroluminescence from poly(vinylcarbazole) films has been reported in a series of four... [Pg.46]


See other pages where Labeling, labels phosphorescent is mentioned: [Pg.1237]    [Pg.747]    [Pg.424]    [Pg.222]    [Pg.975]    [Pg.40]    [Pg.509]    [Pg.48]    [Pg.5]    [Pg.198]    [Pg.198]    [Pg.213]    [Pg.72]    [Pg.623]    [Pg.196]    [Pg.50]    [Pg.36]    [Pg.164]    [Pg.379]    [Pg.325]    [Pg.148]    [Pg.78]    [Pg.197]    [Pg.36]    [Pg.166]    [Pg.208]    [Pg.133]    [Pg.133]    [Pg.135]    [Pg.285]    [Pg.293]    [Pg.85]    [Pg.552]    [Pg.26]    [Pg.166]    [Pg.474]    [Pg.452]   
See also in sourсe #XX -- [ Pg.147 ]




SEARCH



Phosphoresce

Phosphorescence

Phosphorescent

© 2024 chempedia.info