Ketone flow sheet

Acrylic Acid Recovery. The process flow sheet (Fig. 3) shows equipment and conditions for the separations step. The acryUc acid is extracted from the absorber effluent with a solvent, such as butyl acetate, xylene, diisobutyl ketone, or mixtures, chosen for high selectivity for acryUc acid and low solubihty for water and by-products. The extraction is performed using 5—10 theoretical stages in a tower or centrifiigal extractor (46,61—65). 

Peroxide-Ketazine Process. Elf Atochem in France operates a process patented by Produits Chimiques Ugine Kuhhnaim (PCUK). Hydrogen peroxide (qv), rather than chlorine or hypochlorite, is used to oxidize ammonia. The reaction is carried out in the presence of methyl ethyl ketone (MEK) at atmospheric pressure and 50°C. The ratio of H202 MEK NH2 used is 1 2 4. Hydrogen peroxide is activated by acetamide and disodium hydrogen phosphate (117). Eigure 6 is a simplified flow sheet of this process. The overall reaction results in the formation of methyl ethyl ketazine [5921-54-0] (39) and water ... 

Fig. 6. Peroxide—ketazine process flow sheet. MEK = ethyl ketone.

There are a number of minerals in which thorium is found. Thus a number of basic process flow sheets exist for the recovery of thorium from ores (10). The extraction of mona ite from sands is accompHshed via the digestion of sand using hot base, which converts the oxide to the hydroxide form. The hydroxide is then dissolved in hydrochloric acid and the pH adjusted to between 5 and 6, affording the separation of thorium from the less acidic lanthanides. Thorium hydroxide is dissolved in nitric acid and extracted using methyl isobutyl ketone or tributyl phosphate in kerosene to yield Th(N02)4,... 

One of the main disadvantages of this flow sheet is that it requires cobalt in the feed solution to be oxidised from Co(II) to Co(III) prior to nickel SX. Divalent cobalt loads onto the organic phase, bnt does not strip. Co(III) also causes oxidation of the oxime extractant to a ketone, thereby resulting in loss of extractant capacity. Because some residual Co(II) is always present in the SX feed solution, it is necessary to include an oxime regeneration process and a reductive strip of the organic phase to remove cobalt (Skepper and Fittock 1996). 

Copolymers of vinyl chloride, containing 5 to 40 percent vinyl acetate made by the inclusion of vinyl acetate in the polymerization process, have lower softening points and flow more easily than polyvinyl chloride. They are soluble in ketones, such as acetone, and certain esters for making film from solutions. They are used for phonograph records, rigid clear sheeting, and molding pov... 

---