Karlsruhe device

Figure 3 Micro heat exchanger produced by means of mechanical micromachining, (a) Platelet with grooves of 30-p.m depth and 70-p.m width, (b) Assembly of crossflow heat exchanger, (c) Final devices. (Source Forschungszentrum Karlsruhe.)... 

Takeda, T., Kunitomi, K., Horie, T., Iwata, K., Feasibility study on the applicability of a diffusion-welded compact intermediate heat exchanger to next-generation high temperature gas-cooled reactor, Nucl. Eng. Des. 1997, 168,11-21. Bier W., Keller W., Linder G., Seidel, D., Schubert, K., Martin, H., Gas-to-gas heat transfer in micro heat exchangers, Chem. Eng. Process. 1993, 32, 33-43. Schubert, K., Brandner J., Fichtner M., Linder G., Schygulla, U., Wenka, A., Microstructure devices for applications in thermal and chemical process engineering, Microscale Therm. Eng. 2001, 5,17-39. www.fzk.de, Forschungszentrum Karlsruhe, 17 July 2004. 

A miniaturized Fourier transform spectrometer for near-infrared measurements (FTIR, 2500-8330 nm) was developed at the Forschungszentrum Karlsruhe [120], Near-infrared measurements give information, for example, about the oil, water and protein content of liquids or solids. The dimensions of the detector chip are 11.5 x 9.4 mm, the device is essentially a miniaturized Michelson interferometer and it consists of a micro optical bench with beamsplitter, ball lenses, mirrors and the detector chip. The light beam is coupled in via a glass-fiber and an electromagnetic actuator. The signal is derived from the signal response of the detector by Fourier transformation. 

M. Thumm, State of the art of high power Gyro-devices and free-electron Masers, WLssenschaf-tliche Berichte FZKA 5564, Forschungszentrum Karlsruhe GmbH, Karlsruhe 1995, (ISSN 0947-8620). 

---