Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Isocyanides formation

Dehydration of alkyl and aryl iV-formyl compounds with POCI3 is one of the more general routes to alkyl and aryl isocyanides (eq 23). A base, typically an amine base or Potassium t-Butoxide, is also required. The method is simple and effective, although less useful for small, volatile isocyanides than other techniques. The Bischler-Napieralski reaction can occur preferentially to isocyanide formation. ... [Pg.348]

Ring closures which depend on the conversion of the heteroatom into an electrophile are mostly associated with the formation of thiophene, selenophene and tellurophene rings and some illustrative examples are shown in Scheme 17. The last example which concerns the conversion of reaction with isocyanides is of particular interest since it appears to entail the attack of an electrophilic nitrogen species on the aryl ring. [Pg.99]

The direct combination of selenium and acetylene provides the most convenient source of selenophene (76JHC1319). Lesser amounts of many other compounds are formed concurrently and include 2- and 3-alkylselenophenes, benzo[6]selenophene and isomeric selenoloselenophenes (76CS(10)159). The commercial availability of thiophene makes comparable reactions of little interest for the obtention of the parent heterocycle in the laboratory. However, the reaction of substituted acetylenes with morpholinyl disulfide is of some synthetic value. The process, which appears to entail the initial formation of thionitroxyl radicals, converts phenylacetylene into a 3 1 mixture of 2,4- and 2,5-diphenylthiophene, methyl propiolate into dimethyl thiophene-2,5-dicarboxylate, and ethyl phenylpropiolate into diethyl 3,4-diphenylthiophene-2,5-dicarboxylate (Scheme 83a) (77TL3413). Dimethyl thiophene-2,4-dicarboxylate is obtained from methyl propiolate by treatment with dimethyl sulfoxide and thionyl chloride (Scheme 83b) (66CB1558). The rhodium carbonyl catalyzed carbonylation of alkynes in alcohols provides 5-alkoxy-2(5//)-furanones (Scheme 83c) (81CL993). The inclusion of ethylene provides 5-ethyl-2(5//)-furanones instead (82NKK242). The nickel acetate catalyzed addition of r-butyl isocyanide to alkynes provides access to 2-aminopyrroles (Scheme 83d) (70S593). [Pg.135]

Below 100 °C tri-t-butyldiaziridinimine (176) only undergoes inversion at the exocyclic nitrogen, as evidenced by coalescence of NMR signals at about 50 °C. Heating for 1 h to 150 °C, however, results in clean formation of ( )-azoisobutane and t-butyl isocyanide. [Pg.219]

The common impurities found in amines are nitro compounds (if prepared by reduction), the corresponding halides (if prepared from them) and the corresponding carbamate salts. Amines are dissolved in aqueous acid, the pH of the solution being at least three units below the pKg value of the base to ensure almost complete formation of the cation. They are extracted with diethyl ether to remove neutral impurities and to decompose the carbamate salts. The solution is then made strongly alkaline and the amines that separate are extracted into a suitable solvent (ether or toluene) or steam distilled. The latter process removes coloured impurities. Note that chloroform cannot be used as a solvent for primary amines because, in the presence of alkali, poisonous carbylamines (isocyanides) are formed. However, chloroform is a useful solvent for the extraction of heterocyclic bases. In this case it has the added advantage that while the extract is being freed from the chloroform most of the moisture is removed with the solvent. [Pg.63]

The addition of isocyanides and azide to aldehyde-derived enamines has led to tetrazoles (533,536). On the other hand the vinylogous amide of acetoacetic ester and related compounds reacted with aldehydes, isocyanides and acids to give a-acylaminoamides (534). Iminopyrrolidones and imino-thiopyrrolidones were obtained from the addition of cyclohexylisocyanide and isocyanates or isothiocyanates to enamines (535). An interesting method for the formation of organophosphorus compounds is found in the reactions of imonium salts with dialkylphosphites (536). [Pg.424]

Like the Strecker synthesis, the Ugi reaction also involves a nucleophilic addition to an imine as the crucial step in which the stereogenic center of an a-amino acid derivative is formed4. The Ugi reaction, also denoted as a four-component condensation (A), is related to the older Passerini reaction5 (B) in an analogous fashion as the Strecker synthesis is to cyanohydrin formation. In both the Ugi and the Passerini reaction, an isocyanide takes the role of cyanide. [Pg.782]

The reaction of alkoxyarylcarbene complexes with alkynes mainly affords Dotz benzannulated [3C+2S+1C0] cycloadducts. However, uncommon reaction pathways of some alkoxyarylcarbene complexes in their reaction with alkynes leading to indene derivatives in a formal [3C+2S] cycloaddition process have been reported. For example, the reaction of methoxy(2,6-dimethylphenyl)chromium carbene complex with 1,2-diphenylacetylene at 100 °C gives rise to an unusual indene derivative where a sigmatropic 1,5-methyl shift is observed [60]. Moreover, a related (4-hydroxy-2,6-dimethylphenyl)carbene complex reacts in benzene at 100 °C with 3-hexyne to produce an indene derivative. However, the expected Dotz cycloadduct is obtained when the solvent is changed to acetonitrile [61] (Scheme 19). Also, Dotz et al. have shown that the introduction of an isocyanide ligand into the coordination sphere of the metal induces the preferential formation of indene derivatives [62]. [Pg.75]

The only recent (as of 2003) use of such bond formation involves two carbon atoms that are activated by double bonds or as isocyanides. The following examples illustrate the present limited scope of this type of synthesis. [Pg.12]

Linking the ketone and carboxylic acid components together in an Ugi reaction facilitates the synthesis of pyrrolidinones amenable to library design. The three-component condensation of levulinic acid 30, an amine and isocyanide proceeds under microwave irradiation to give lactams 31 [65]. The optimum conditions were established by a design of experiments approach, varying the equivalents of amine, concentration, imine pre-formation time, microwave reaction time and reaction temperature, yielding lactams 31 at 100 °C in poor to excellent yield, after only 30 min compared to 48 h under ambient conditions (Scheme 11). [Pg.41]

When the reagent is the thiocyanate ion, S-alkylation is an important side reaction (10-43), but the cyanate ion practically always gives exclusive N-alkylation. ° Primary alkyl halides have been converted to isocyanates by treatment with sodium nitrocyanamide (NaNCNN02) and m-chloroperoxybenzoic acid, followed by heating of the initially produced RN(N02)CN. ° When alkyl halides are treated with NCO in the presence of ethanol, carbamates can be prepared directly (see 16-7). ° Acyl halides give the corresponding acyl isocyanates and isothiocyanates. For the formation of isocyanides, see 10-111. [Pg.516]

In analogy, Ugi et al. reported on a lactam formation by running a one-pot three components reaction the condensation of L-lysine 7, isobutyraldehyde and methyl isocyanide led to the corresponding a-amino-c-caprolactam 9, but the yield was not given. The authors presumed either a nucleophilic substitution of the ester 8 as the primary Ugi product by the amino function of the side chain or, alternatively, the nucleophilic attack of the NH2-group on an intermediately formed 0-acylamide and a subsequent rearrangement (Scheme 1) [4]. [Pg.128]

While on the subject of reviews, attention should also be directed to a very recent collection of articles on isocyanide chemistry edited by Ugi 156). This volume is oriented somewhat toward the organic chemistry of isocyanides, but not with the complete exclusion of metal complexes of these species one is directed in particular to the chapters by Vogler (Chapter 10) on coordinated isocyanides and by Saegusa and Ito (Chapter 4) on a-additions to isocyanides. These latter reactions are often catalyzed by copper(I) compounds and occasionally by other metal complexes as well, and it is believed that this catalysis is accomplished by intermediate formation of metal isocyanide complexes. [Pg.22]

Some infrared data on these catalytic systems also support the intermediate complex formation (123). For a heterogeneous system of Cu metal and cyclohexyl isocyanide one observes, in solution, a vcn absorption at 2180 cm , compared to 2140 cm for the free isocyanide. Absorptions at 2181 and 2192 cm for the systems with CujO and CuCl, respectively, are measured. The solutions in each case have catalytic activity. The suggestion is made that either a copper(O) complex (from Cu metal) or copper(I) isocyanide complex (from CU2O or CuCl) is the catalytic species present. [Pg.48]

In addition to a-additions to isocyanides, copper oxide-cyclohexyl isocyanide mixtures are catalysts for other reactions including olefin dimerization and oligomerization 121, 125, 126). They also catalyze pyrroline and oxazoline formation from isocyanides with a protonic a-hydrogen (e.g., PhCH2NC or EtOCOCHjNC) and olefins or ketones 130), and the formation of cyclopropanes from olefins and substituted chloromethanes 131). The same catalyst systems also catalyze Michael addition reactions 119a). [Pg.49]

Beck and Fehlhammer (18, 19) describe reactions of several metal azide complexes, including Au(N3)4, with isocyanides which yielded a tetrakis-(tetrazolato)aurate(I) species. The formation of Au(PPh3)C(OCH3)=N-p-... [Pg.80]

Depending on the R group, this reaction could lead to the formation of gold(I) isocyanide complexes that behave as liquid crystals. Thus, complexes [Au(C6F5) (C = N(QH4)OCioH2i-p)] and [Au(QF5)(C = N(QH4)OCnH2n + rP)] [64] where n = 4, 6, 8, 10 and 12 show this behavior. All of these complexes are mesomorphic and behave as liquid crystals showing a nematic (N) phase when the isocyanide has a... [Pg.97]

The reaction of the complex [Au(C6E5)(Ph2C=N—N=CPh2)] with 2,6-dimethyl-phenylisocyanide (CNXy) leads to the formation of [Au(CGF5)(CNXy)] [50] by displacement of the ligand. The IR shows an absorption at 2214 cm that is due to the V(CN) of the coordinated isocyanide. [Pg.100]

Carbene gold(III) with diamine ligand can coordinate a second metallic center, since the N -ligand contains a free N H 2 group and can react with a new gold isocyanide under the formation of double dinuclear carbenes [46] (32). [Pg.143]


See other pages where Isocyanides formation is mentioned: [Pg.78]    [Pg.78]    [Pg.78]    [Pg.78]    [Pg.78]    [Pg.78]    [Pg.78]    [Pg.78]    [Pg.90]    [Pg.127]    [Pg.128]    [Pg.133]    [Pg.84]    [Pg.149]    [Pg.39]    [Pg.207]    [Pg.506]    [Pg.317]    [Pg.54]    [Pg.305]    [Pg.45]    [Pg.58]    [Pg.59]    [Pg.63]    [Pg.75]    [Pg.80]    [Pg.354]    [Pg.6]    [Pg.135]    [Pg.362]   
See also in sourсe #XX -- [ Pg.366 , Pg.368 , Pg.1290 ]




SEARCH



Heterocyclic compounds formation from isocyanides

© 2024 chempedia.info