Isoamyl alcohol, dehydration

Methyl Isoamyl Ketone. Methyl isoamyl ketone [110-12-3] (5-methyl-2-hexanone) is a colorless Hquid with a mild odor. It is produced by the condensation of acetone and isobutyraldehyde (164) in three steps which proceed via the keto-alcohol dehydration to 5-methyl-3-hexen-2-one, and hydrogenation to 5-methyl-2-hexanone. 

Other Higher Oleiins. Linear a-olefins, such as 1-hexene and 1-octene, are produced by catalytic oligomerization of ethylene with triethyl aluminum (6) or with nickel-based catalysts (7—9) (see Olefins, higher). Olefins with branched alkyl groups are usually produced by catalytic dehydration of corresponding alcohols. For example, 3-methyl-1-butene is produced from isoamyl alcohol using base-treated alumina (15). 

In a similar manner, coccinelline (99) and precoccinelline (100) have been synthesized from 2,6-lutidine (351) (336,450). Thus, treatment of the monolithium derivative (153) of 351 with P-bromopropionaldehyde dimethylacetal gave an acetal, which was converted to the keto acetal (412) by treatment with phenyllithium and acetonitrile. Reaction of 412 with ethylene glycol and p-toluenesulfonic acid followed by reduction with sodium-isoamyl alcohol gave the cw-piperidine (413). Hydrolysis of 413 with 5% HCl gave the tricyclic acetal (414) which was transformed to a separable 1 1 mixture of the ketones (415 and 416) by treatment with pyrrolidine-acetic acid. Reaction of ketone 416 with methyllithium followed by dehydration with thionyl chloride afforded the rather unstable olefin (417) which on catalytic hydrogenation over platinum oxide in methanol gave precoccinelline (100). Oxidation of 100 with m-chloroperbenzoic acid yielded coccinelline (99) (Scheme 52) (336,450). 

Comparison of the Activation Energies of the Dehydrogenation of Isoamyl Alcohol (fiHz) and of Its Dehydration (eHao) on Ni—Al Os... 

Anhydrous stannous chloride, a water-soluble white soHd, is the most economical source of stannous tin and is especially important in redox and plating reactions. Preparation of the anhydrous salt may be by direct reaction of chlorine and molten tin, heating tin in hydrogen chloride gas, or reducing stannic chloride solution with tin metal, followed by dehydration. It is soluble in a number of organic solvents (g/100 g solvent at 23°C) acetone 42.7, ethyl alcohol 54.4, methyl isobutyl carbinol 10.45, isopropyl alcohol 9.61, methyl ethyl ketone 9.43 isoamyl acetate 3.76, diethyl ether 0.49, and mineral spirits 0.03 it is insoluble in petroleum naphtha and xylene (2). 

---