Iron halides reactions with

Iron halides react with halide salts to afford anionic halide complexes. Because iron(III) is a hard acid, the complexes that it forms are most stable with F and decrease in both coordination number and stability with heavier halides. No stable I complexes are known. [FeF5(H20)]2 is the predominant iron fluoride species in aqueous solution. The [FeF6]3 ion can be prepared in fused salts. Whereas six-coordinate [FeClJ3 is known, four-coordinate complexes are favored for chloride. Salts of tetrahedral [FeClJ can be isolated if large cations such as tetraphenylarsonium or tetraalkylammonium are used. [FeBrJ is known but is thermally unstable and disproportionates to iron(II) and bromine. Complex anions of iron(II) halides are less common. [FeClJ2 has been obtained from FeCl2 by reaction with alkali metal chlorides in the melt or with tetraethylammonium chloride in deoxygenated ethanol. 

Perfluoroalkyl or -aryl halides undergo oxidative addition with metal vapors to form nonsolvated fluonnated organometallic halides and this topic has been die subject of a review [289] Pentafluorophenyl halides react with Rieke nickel, cobalt, and iron to give bispentafluorophenylmetal compounds, which can be isolated in good yields as liquid complexes [290] Rieke nickel can also be used to promote the reaction of pentafluorophenyl halides with acid halides [297] (equation 193)... 

All the anhydrous - -3 and +2 halides of iron are readily obtained, except for iron(III) iodide, where the oxidizing properties of Fe and the reducing properties of 1 lead to thermodynamic instability. It has, however, been prepared in mg quantities by the following reaction, with air and moisture rigorously excluded,... 

The preparation of carbonylmetals by treating a transition metal halide either with carbon monoxide and zinc, or with iron pentacarbonyl is well-known and smooth. However, a violent eruptive reaction occurs if a methanolic solution of a cobalt halide, a rhodium halide or a ruthenium halide is treated with both zinc and iron pentacarbonyl. 

The same electrochemical process was also used for the coupling between aldehydes or ketones and activated alkyl halides such as a-chloroesters, -nitriles, and -ketones as well as aya-dichloroesters.334 Electroanalytical studies have shown initial electroreduction of Fe(n) to Fe(i) and subsequent formation of an iron organometallic intermediate (e.g., a 7t-allyliron complex in Equation (27)) before reaction with the corresponding carbonyl compounds.335... 

The reactivity of iron(II) cations [FeX]+, where X = H, Me, C3H5, NH2, OH, F, Cl, Br, and I, have been examined by reactions with acetone (177). The C-C bond activation was the major process for the iron halide cations. The [FeF]+ ion promoted C-H bond activation as well as C-C bond activation and C-H bond activation was also promoted by the other [FeX]+ ions. The relative reactivities of the [FeX]+ ions toward acetone have been correlated with the thermochemical and electronic properties of the substituents X. 

In the case of either substance the bromine is doubtless first added on at the double bond. Whilst the reaction takes place easily with the reactive double bond of the olefines, carriers such as iron, iron halide, and aluminium bromide are required for the sluggish double bond of the benzene ring ... 

In a similar manner, Jt-allyl complexes of manganese, iron, and molybdenum carbonyls have been obtained from the corresponding metal carbonyl halides [5], In the case of the reaction of dicarbonyl(r 5-cyclopentadienyl)molybdenum bromide with allyl bromide, the c-allyl derivative is obtained in 75% yield in dichloromethane, but the Jt-allyl complex is the sole product (95%), when the reaction is conducted in a watenbenzene two-phase system. Similar solvent effects are observed in the corresponding reaction of the iron compound. As with the cobalt tetracarbonyl anion, it is... 

The possibility that substitution results from halogen-atom transfer to the nucleophile, thus generating an alkyl radical that could then couple with its reduced or oxidized form, has been mentioned earlier in the reaction of iron(i) and iron(o) porphyrins with aliphatic halides. This mechanism has been extensively investigated in two cases, namely the oxidative addition of various aliphatic and benzylic halides to cobalt(n) and chromiumfn) complexes. 

Violent reactions can occur with many metal hahdes. For example, with zinc halides or iron halides, single replacement reactions take place. Such potassium-metal halide mixtures can react violently when subjected to mechanical shock. 

Silica is reduced to silicon at 1300—1400°C by hydrogen, carbon, and a variety of metallic elements. Gaseous silicon monoxide is also formed. At pressures of >40 MPa (400 atm), in the presence of aluminum and aluminum halides, silica can be converted to silane in high yields by reaction with hydrogen (15). Silicon itself is not hydrogenated under these conditions. The formation of silicon by reduction of silica with carbon is important in the technical preparation of the element and its alloys and in the preparation of silicon carbide in the electric furnace. Reduction with lithium and sodium occurs at 200—250°C, with the formation of metal oxide and silicate. At 800—900°C, silica is reduced by calcium, magnesium, and aluminum. Other metals reported to reduce silica to the element include manganese, iron, niobium, uranium, lanthanum, cerium, and neodymium (16). 

Recently, Fu and coworkers have shown that secondary alkyl halides do not react under palladium catalysis since the oxidative addition is too slow. They have demonstrated that this lack of reactivity is mainly due to steric effects. Under iron catalysis, the coupling reaction is clearly less sensitive to such steric influences since cyclic and acyclic secondary alkyl bromides were used successfully. Such a difference could be explained by the mechanism proposed by Cahiez and coworkers (Figure 2). Contrary to Pd°, which reacts with alkyl halides according to a concerted oxidative addition mechanism, the iron-catalyzed reaction could involve a two-step monoelectronic transfer. 

---