Ion exchange catalysis

In recent years, the rate of information available on the use of ion-exchange resins as reaction catalysts has increased, and the practical application of ion-exchanger catalysis in the field of chemistry has been widely developed. Ion-exchangers are already used in more than twenty types of different chemical reactions. Some of the significant examples of the applications of ion-exchange catalysis are in hydration [1,2], dehydration [3,4], esterification [5,6], alkylation [7], condensation [8-11], and polymerization, and isomerization reactions [12-14]. Cationic resins in form, also used as catalysts in the hydrolysis reactions, and the literature on hydrolysis itself is quite extensive [15-28], Several types of ion exchange catalysts have been used in the hydrolysis of different compounds. Some of these are given in Table 1. 

Pitochelli, A.R., 1980, Ion Exchange Catalysis and Matrix Effects , Rohm and Haas, Philadelphia, USA. 

At one extreme diffusivity may be so low that chemical reaction takes place only at suface active sites. In that case p is equal to the fraction of active sites on the surface of the catalyst. Such a polymer-supported phase transfer catalyst would have extremely low activity. At the other extreme when diffusion is much faster than chemical reaction p = 1. In that case the observed reaction rate equals the intrinsic reaction rate. Between the extremes a combination of intraparticle diffusion rates and intrinsic rates controls the observed reaction rates as shown in Fig. 2, which profiles the reactant concentration as a function of distance from the center of a spherical catalyst particle located at the right axis, When both diffusion and intrinsic reactivity control overall reaction rates, there is a gradient of reactant concentration from CAS at the surface, to a lower concentration at the center of the particle. The reactant is consumed as it diffuses into the particle. With diffusional limitations the active sites nearest the surface have the highest turnover numbers. The overall process of simultaneous diffusion and chemical reaction in a spherical particle has been described mathematically for the cases of ion exchange catalysis,63 65) and catalysis by enzymes immobilized in gels 66-67). Many experimental parameters influence the balance between intraparticle diffusional and intrinsic reactivity control of reaction rates with polymer-supported phase transfer catalysts, as shown in Fig. 1. 

Many applications of silica-based nanoporous materials such as adsorption, ion exchange, catalysis and sensing, require specific surface properties. Since the discovery of the MCM series of mesoporous materials [1], two main methods have been used to functionalize their large internal surface [2]. 

Corrosion, determination of corrosion products on iron and steel surfaces, adsorption properties of ion exchangers, catalysis, surface reactions on catalysts, coatings, effect of the preparation parameters on the phase composition and the short-range order... 

Layered titanium phosphates have many potentially important applications in ion exchange, catalysis, intercalation, and sorption. Characterization of metal local environments by solid-state " /" Ti NMR has been difficult. In this work, the local structures around Ti in several representative layered systems, including alpha-, beta-, and gamma-TiP have been characterized, by examining the static NMR spectra of these ma-... 

Pitochelli A. R., Ion exchange catalysis and matrix effects , Rohm and Hass, Philadelphia, (1980)... 

---