International brightness

The reflection tomograms (c) show the axial hole in the Plexiglas specimen, but also a real discontinuity in the A/5i -alloy. The internal discontinuity is located 6 mm from the edge, 50° from the axial hole and its dimension is about 1-2 mm. This may be an inclusion or a porosity (void). Multiple reflections from the measurement were ignored in the calculation of the Plexiglas tomogram (left). This is seen as a bright circle. 

Several of the welded junctions were removed from the system for metallographic examination (Fig. 15.20). As can be seen from Fig. 15.20, the internal surface was covered with reddish and tan deposits and corrosion products. The metal surface itself retained a bright, metallic luster. 

The first DNA preparations in this part of the study was PCR product - DNA of Chlamydia trachomatis 17 > bp), in the presence of a smaller by molecular mass internal control of human DNA. After migration the gel was exposured for 5, 30, 300 and 600 seconds by transilluminator Vilber Lourmat, equipped with 6 UV lamps with irradiance W = 0,24 W/m2 and 254 nm filter. The degree of structural integrity loss of amplificated DNA was evaluated by the decrease of brightness intensity of the of the bands processed by using the tools of "ImageJ" computer program. 

Other detection modes in bright CL or BL reactions are multichannel detectors, which provide simultaneous detection of the dispersed radiation and produce a permanent image of a wide area. Photographic films or plates are emulsions that contain silver halide crystals in which incident photons produce stable clusters of silver atoms within the crystals. Internal amplification is provided in the development process by an electron donor that reduces the remaining silver ions to silver atoms within the exposed crystals. A complexing agent is used to remove the... 

The transmission electron microscope is now well established as a useful tool for the characterization of supported heterogeneous catalysts(l). Axial bright-field imaging in the conventional transmission electron microscope (CTEM) is routinely used to provide the catalyst chemist with details concerning particle size distributions, 3), particle disposition over the support material(2-6) as well as particle morphology(7). Internal crystal structure(8-10), and elemental compositions(ll) may be inferred by direct structure imaging. 

Each end of the rod of power Is ornamented with a tree s fruit the almond nut and the pine cone. This, the true wand of practitioners of the Great Work, is internal. It is described by Eliphas Levi in his Sanctum Regnum and shown in the suit of Wands in the tarot designed by Paul Foster Case as having identical crystals (more accurately diamonds), one bright and one dark, on either end of the rod, just as, on the simple... 

For syntheses of anthraquinone from phthalic anhydride compare Chap. IX. 6, p. 352. As a dye alizarin is very important. This is due to its power of forming very stable beautifully coloured internally complex diphenoxides with the hydroxides of plurivalent metals (Cu, Sn, Cr, Fe, Al). The best known is the bright red aluminium lake Turkey red . 

Steel It has a higher C content (usually 0.5-1%) and is harder than soft bon. An important property of steel is that it may be hardened. If heated to bright redness (to obtain an austenitic alloy) and suddenly cooled quenched), by putting it in water, oil, etc, it becomes hard and brittle due to the formation of the very hard martensite. Brittleness can be removed by tempering (that is by a carefully heating for a short time at, say, 250-300°C) to release or dimmish the internal strains resulted from quenching. 

---