Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Instrumentation pulsed amperometric detection

Electrochemical biosensors have some advantages over other analytical transducing systems, such as the possibility to operate in turbid media, comparable instrumental sensitivity, and possibility of miniaturization. As a consequence of miniaturization, small sample volume can be required. Modern electroanalytical techniques (i.e., square wave voltammetry, chronopotentiometry, chronoamperometry, differential pulse voltammetry) have very low detection limit (1(T7-10 9 M). In-situ or on-line measurements are both allowed. Furthermore, the equipments required for electrochemical analysis are simple and cheap when compared with most other analytical techniques (2). Basically electrochemical biosensor can be based on amperometric and potentiometric transducers, even if some examples of conductimetric as well as impedimetric biosensor are reported in literature (3-5). [Pg.116]

Several metal oxides (platinum, gold," nickel, copper, ) and cobalt phtalo-cyanine have been employed as surface bound mediators for carbohydrate detection. In a dc amperometric mode of operation detectors based on these mediators exhibit a significant loss of response with time and/or exposure to analyte. Various potential pulse programs have circumvented this stability problem, but at the expense of sensitivity and complexity of the instrumentation. Silver electrodes coated with electrogenerated silver oxide exhibit electrocatalytic activity with respect to carbohydrate oxidation. This paper describes our efforts to utilize an electrode as a carbohydrate detector in a dc amperometric mode. [Pg.276]

Voltammetric techniques that can be applied in the stripping step are staircase, pulse, differential pulse, and square-wave voltammetry. Each of them has been described in detail in previous chapters. Their common characteristic is a bell-shaped form of the response caused by the definite amount of accumulated substance. Staircase voltammetry is provided by computer-controlled instruments as a substitution for the classical linear scan voltammetry [102]. Normal pulse stripping voltammetry is sometimes called reverse pulse voltammetry. Its favorable property is the re-plating of the electroactive substance in between the pulses [103]. Differential pulse voltammetry has the most rigorously discriminating capacitive current, whereas square-wave voltammetry is the fastest stripping technique. All four techniques are insensitive to fast and reversible surface reactions in which both the reactant and product are immobilized on the electrode surface [104,105]. In all techniques mentioned above, the maximum response, or the peak current, depends linearly on the surface, or volume, concentration of the accumulated substance. The factor of this linear proportionality is the amperometric constant of the voltammetric technique. It determines the sensitivity of the method. The lowest detectable concentration of the analyte depends on the smallest peak current that can be reliably measured and on the efficacy of accumulation. For instance, in linear scan voltammetry of the reversible surface reaction i ads + ne Pads, the peak current is [52]... [Pg.217]


See other pages where Instrumentation pulsed amperometric detection is mentioned: [Pg.735]    [Pg.1028]    [Pg.315]    [Pg.799]    [Pg.297]    [Pg.277]    [Pg.1243]    [Pg.256]    [Pg.335]   


SEARCH



Amperometric detection

Amperometric detection instrumentation

Detection pulsed

Instrumental Detection

Instrumentation pulsed

Pulsed amperometric detection

© 2024 chempedia.info