Installation waviness

After properly securing the wire rope in the drum socket, the number of excess or dead wraps or turns specified by the equipment manufacturer should be maintained. Whenever possible, a new wire rope should be run under controlled loads and speeds for a short period after installation. This will help to adjust the rope to working conditions. If a new coring or swabbing line is excessively wavy when first installed, two to four sinker bars may be added on the first few trips to straighten the line. 

The intercooler is used to reduce power consumption for the compressors and improve the efficiency of the regenerative gas turbine system. In this section, helium in the pressure rise process of the compressors is cooled by the cooling water rurming through a wavy-firmed flat tube. The system design has been done on the basis of installation of two intercoolers, and Table 5 shows the specification of the first stage of the intercooler. 

If a geomembrane is installed in a more or less wavy fashion or if the subgrade surface is very rough, the question arises as to what extent a lat-... 

---