Injection molding in polymer matrix composites

Key words injection molding, processes and variants, mechanical properties, fiber orientation, molding defects and corrections. 

Manufacturing techniques for poiymer matrix composites (PMCs) 

3 Schematic of (a) the fluid-assisted injection molding process, (b) the setup for the process. 

In-mold decoration (IMD) injection molding is a process of over-molding on decorated thermoplastic film or applied with an overlay of melted 

---

Discontinuous fibers are used when the manufacturing process prohibits the application of continuous fibers, for example, in injection molding. In composites of discontinuous fibers, stress cannot be transmitted from the matrix polymer to the fibers across the fiber ends. Under load, the polymer is subjected to a shear stress... 

BPA/DC-based composition served as a polymer matrix in carbon fiber composites [24]. Metal powder or fiber filled molding compounds were also described. The molding compounds, which can contain, moreover, numerous other components, bismaleimides (cf. Sect. 5) in particular, are used for the manufacturing of heat conductive molds for injection molding [25],... 

If the materials are anisotropic, they will present different properties in the different directions. Examples of these polymeric materials are polymer fibers, such as polyethylene terephthalate, PET, nylon fibers, injection-molded polymers, fiber-reinforced composites with a polymeric matrix, and crystalline polymers where the crystalline phase is not randomly oriented. A typical method for measuring the modulus in tension is the stress-strain test, in which the modulus corresponds to the initial slope of the stress-strain curve. Figure 21.4 shows typical stress-strain curves for different types of polymeric materials. 

---